Question about 1992 GMC Sierra

Open Question

Cant figure out where the radio should plug into in the back

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 95 gmc sierra 2500 and im trying to put in my aftermarket rafio so i cut the stock harness out the square puece that goes in back of stock radio and now i cant figure out what wire is what i got...

I would suggest you spice the wires back to stock harness by male and female connections and tape over them with black tape then get a stereo install kit that includes a wiring harness ( cost about $20 maybe or less) for the year of truck you have... it will plug right to your stock harness ...never just cut stock stereo wires from stock plug it will be more of a headache than you think trust me I've installed all my own stereo system been there done that... good luck

Mar 31, 2015 | 1995 GMC Sierra

1 Answer

Radio switch behind steering wheel does not work

General advice:
Radio controls has two plugs:
one is behind the switch,the other is on the back of the radio,ceck to be firmly plugged.
Most commun :radio in plug is loosed.
Cheers,hope u figure it out.Share.

Oct 27, 2013 | 2006 Chrysler Sebring 2.7

1 Answer

79 lincoln continental radio wires

This is for an 82. Hope it helps.
Constant 12V+Light Green Switched 12V+Yellow/Black Groundn/a IlluminationBlue/Brown Dimmern/a Antenna TriggerOrange/Blue AntennaRight Rear Front Speakers5 1/4" DoorsLeft Front (+)Green Left Front (-)Black/White Right Front (+)White/Red Right Front (-)Black/White Rear Speakers6" x 9" Rear DeckLeft Rear (+)Pink/Red Left Rear (-)Pink/Blue Right Rear (+)Pink/Light Blue Right Rear (-)Green/Red

Jun 18, 2013 | Cars & Trucks

1 Answer

How does radio hook up

The stock radio has two electrical plugs and the anneena wire plugs in and theirs a grond wire that goes on the back of the unit with a bolted connection. If you have an aftermarket radio you can get universal connectors at major dept stores that fit your car ( or auto parts stores) These connectors plug into the cars wire harness and the wires are labled to what they do and just connect the wires as marked on the sticker on the radio. If the radio is a factory radio that did'nt come in an Isuzu their commonly not marked and the wire pattern in the back of the radio has to be figured out.

Mar 08, 2011 | 1997 Isuzu Rodeo

1 Answer

I have an 03 passat 1.8L. I drained the tranny fluid but cant figure out where the filler plug is located to put fluid back in...I know it requires a pump and I have that...just cant figure out how to put...

look for large hexagon drive plug its on the outside of box about halfway up. either close to diff casing or on front of box closest front bumper probably 14mm hex drive

Jul 17, 2010 | 2003 Volkswagen Passat

1 Answer

I have my 6 digit number for radio but cant figure out how to put code in

Turn radio on and enter the code on the preset station numeric buttons Write the code on the back of the sun visor for next time the battery is disconnected

May 12, 2010 | 1992 Volvo 940

1 Answer

I cant figure out how to hook up my new raido in my car can u help

The easiest way it to get a wiring adapter, any auto parts place or even walmart sells them in the automotive radio department. They plug into the factor harness connector, but you will still have to splice the adapter to the new radio harness, but the wires will be color coded the same at the new harness.

Apr 18, 2010 | 1998 Ford Escort

1 Answer

Im installing a radio in my 03 chevy avalanche and i cant figure out y it wont work

if you put it in with the wire harness that plugs into the trucks harness you have to make sure the amp turn on wire is connected from the radio to the harness if the amp isnt on you get no sound, if you didnt buy the harness and cut into the trucks wires you could have a problem, check all radio and amp fuses also

Feb 23, 2010 | 2003 Chevrolet Avalanche

1 Answer

Want to change the Radio

You might want to go to an auto parts store and get one of those flexible mirrors, because the bolts to release it are on the back of the radio. I'm pretty sure they are 10mm head. The mirror and a flashlight will make them easier to locate. There will either be 2 or 4 it depends. Once you get them out you should be able to push from the back and it'll slide on out. As for which radio will fit, pretty much all of your radio shops can give you that info but it should be a single DIN size. Hope this helps.

Jun 01, 2009 | 2003 Honda Civic

1 Answer

Cant find the plugs for the wiring harness for the cd player

Radio wiring will start from the fuse box side to the back of the radio. Speaker wiring will be packed away with other related interior wiring

May 24, 2009 | 1992 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76051 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides