Question about 1992 Nissan King Cab

1 Answer

How to remove tail light on 92 nissan truck? truck has liner, ...i dont see any exterior screws.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Access to screws is behind the light. access screws through two holes located behind light in the bed of the truck. use 6-inch socket extension and 13-mm socket. loosen screws and light comes out.

Posted on Apr 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior lights and exterior parking lights and tail lights dont work and all the fuses are good


sounds like your light switch is bad..that's the only place all those share in common.

Jan 11, 2013 | 1986 Nissan Pickup 4WD 1986

1 Answer

How do you remove the tail light assembly to change bulbs on a 2003 frontier sc.


There are two phillips-headed bolts on each inside corner of the truck bed, behind the tailgate latches, that may be used to attach the brackets for the optional bed extender. If you have a bed liner installed, you will need to pull the corner of the liner back to expose the bolts.The factory bed liner needs to be flexed around the upper cargo hook to gain access to the two hex head screws that hold the tail-light housing against the body.Remove the screws so the tail light housing gets loose and easily comes out. this will help.please keep updated for further assistance if more help required. thanks.

Apr 29, 2010 | 2005 Nissan Frontier

2 Answers

Change brake light bulb on a 2000 Nissan Frontier


The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.

Mar 30, 2010 | 2000 Nissan Frontier

2 Answers

Need to replace bulb in tail light on 2001 150 FORD pickup


drop tail gate ,,their should be two screws on tail gate seam,,remove them,,tilt lens out,,

Feb 13, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Replace rear tail light bulb on a 2005 nissan maxima


Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Oct 04, 2009 | 2005 Nissan Maxima

1 Answer

How do change the tail light on a 2007 nissan maxima sedan


I think it is the same as a '04 maxima. Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jun 30, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

Need to change the stop light for 05 nissan maxima.


Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jan 09, 2009 | 2004 Nissan Maxima

3 Answers

How to access brake tail light to change


Tail light replacement is not as hard as it seems.
Tools needed:flat head screwdriver and a deep 5/32 socket(a pair of pliers will work).
Step 1: open trunk and pull back truck liner at tail light.There is a small button clip on liner.Use screwdriver to pop up the center of button clip,pull clip out of hole.
Step 2:You will see a black wire attached to the body of car with 2 white clips.Use screwdriver to pop clips off of studs.
Step 3:Remove the nuts from the studs and pull tail light assembly straight back away from car.The outer side of the light just snaps in and out of place.
Step 4:Turn light socket counter clockwise 1/3 turn and pull out.
Step 5:Pull bad bulb straight out and replace.Reverse steps to reassemble.

Oct 24, 2008 | 2007 Nissan Sentra 2.0 SL Sedan

1 Answer

2002 4Runner 4X tail light replacement


Well I dont know bout a 2002. I have a 92 4runner and my bulbs are exterior and all you need is a phillips to unscrew the light. Then you can just pull the bulb and replace it.

Aug 04, 2008 | 2002 Toyota 4Runner

2 Answers

I have a brake light out.How do you get to those things. This is a 1998 nissan frontier


do you have a bed liner?? if so, you need to move the bed liner away from the rear lights in back to access the screws that hold the tail light in. on the side of the bed right by the tail light are 2 screws holding the light in. remove screws, remove tail light replace bulbs, re-assemble.

Jul 22, 2008 | 2005 Nissan Frontier

Not finding what you are looking for?
1992 Nissan King Cab Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...