Question about 2002 Jaguar S-Type

1 Answer

My light came on, took it too a local garage as I had no loss of power or anything. codes P0037 P1532 P2503 what do these mean

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 142 Answers

P0037 HO2S Heater Control Circuit Low (Bank 1 Sensor 2) (One of your oxygen sensor heaters is failing)
P1532 IMCC B: Circuit Malfunction (This is a code related to one of the two intake tuning valves (the bottom one) either the valve or the wiring could be at fault
P2503 Charging System Voltage Low

I'd get that checked to see which of these codes are currently "active" or still happening. Some of these might be inactive and I wouldn't worry about them until they come active again (if they ever do)

Except for the P2503, which could indicate a failing battery or alternator, and could eventually leave you stranded, the other two codes are pretty harmless in themselves. The oxygen sensor heater is used when the exhaust system is cold to fine tune the air/fuel ratio in the engine, and the intake tuning valves are pretty much used for the same reason (air/fuel ratio fine tuning). The worst case scenario for those is a lack of power and/or fuel economy...

Posted on Sep 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Our 4x4 Dodge ram 1500 is running rough after we replaced a busted radiator. It gave out code p304 and p2503. My husband took off all the coils and battery connections and cleaned them and dried them.

P0304 Code Cylinder 4 Misfire
The p2503 code is - charging system low output. If the engine ran ok before the radiator blew, then components and wire are probably still wet or moist. Especially with cylinder #4 , take off spark plug wire from spark and from coil and dry out the inside of the boots. Also, try blowing the alternator dry with a hair drier.

May 11, 2014 | Cars & Trucks

1 Answer

All 4 O2 sensors failed at same time

No that is not possible. You either have lost power or ground to sensors or the system has a fuel control issue.

Nov 04, 2013 | 2004 Nissan Pathfinder

1 Answer

2002 VW Polo - EPC Light and Loss of Power

It is a wiring fault, but they are looking on the wrong end. You will need to have a VW dealer "repin" the electrical connector at the throttle body. What this means is, the dealer will take apart the connector, cut off the old pins and crimp on new ones and reassemble the connector. This is a common problem on drive by wire VW's. The dealer has a bulletin on the problem and I don't know why they missed it. They will probably have to order the connector kit however. Good luck!

Feb 06, 2010 | 2002 Volkswagen Golf

1 Answer

The exhaust emmission light is on in my 2004 bmw 318i and I have had loss of power when driving it?? Waht could be the problem as the light is now off and the local garage cannot find a problem. thanks,...

Hi Angela,
It sounds like it could be a problem with the catalytic converter. If it is this, as well as the continued loss of power you may also notice that the exhaust emissions start to occasionally haves quite a strong and horrible smell.

If your local mechanic has an OBD lead he/she will still be able to plug it into the car and read the fault code from the cars ECU (computer thingy!). You don't need to wait for the light to come on again as the fault code should still be in the memory of CPU.

If your local garage does not have the correct OBD software for your car, you can still go to the stealership, ahem I mean BMW dealership (hehe..!) as reading the fault code is quick and very cheap to do. At least you will know if it the catalytic converter at fault, (I hope it is not as this one can be expensive to replace, sorry). Good Luck Angela.

Jan 20, 2010 | 2003 BMW 325

1 Answer

Same as previous person

egr valve stock in open position,replace unit

Aug 06, 2009 | 2003 Renault Sportwagon

1 Answer

Airbag light says on: when tested it was ready to depoy why

When your airbag light is on, it means that the air bag system is malfunctioning, and not ready to deploy. You will need to take it to a dealership where they actually have the knowledge to find and fix your problem.

Jul 02, 2009 | 1999 Buick Century

3 Answers

Check engine light is on

i checked the computer. Following error is showing:
1. P115
2. P1300
3. P1565
4. P1349
5. P1656

Mar 16, 2009 | 2005 Toyota Corolla

2 Answers

97 LHS check engine light one, no code

Flashing check engine light means you have a severe misfire which could damage the catalytic converter . Plug's , plug wires , coil etc....

Jan 16, 2018 | 1997 Chrysler LHS

Not finding what you are looking for?
2002 Jaguar S-Type Logo

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

78267 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides