I have a 2006 dodge grand caravan SXT. The passenger side sliding door lock is sticking. I'm assuming I need to get the door panel off so I can get a look inside. How do I do that, or do you think you might know why it's sticking. all other locks work perfectly.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
disengage the saftey
Anon, I believe it is done on the overhead console or if you mean the child prevention lock, it is a small switch by the doors latching assembly. Links below give instruction.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." Thread 2011 Grand Caravan Sliding Door Child Safety Lock Engaging on its...
see the diagram attached and think clearly and logically, NOT feared. test any connection continuity, fuses, see for corrosion, tes the switch for defective or dirty, and motor.,loose connector or connector God bless you
There are contacts in the door jam, first check and clean these contacts. If they seem fine, and you have a way to check for power on these, test and make sure they supply voltage with a volt/ohm meter. If you are getting power through the contacts, that only leaves the lock actuator itself as being faulty.