Question about 2002 Kia Sedona

1 Answer

Engine light on code po141 oxygen sens bank 1 sens 2

2001 mr2 roadster oxygen sensor code p 0141 shows bank 1 sensor 2 at fault the car has 3 sensors 2 at the top positioned left and right prior to the cat and 1 at the bottom after the cat .I need to know which sensor this is as do not want to change the wrong one.I have been told bank 1 is prior to the cat so sensor would be one of the top ones and would assume it to be the right hand one .Can anyone help out on this matter please

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

Bank 1 will be whichever side cylinder 1 of your engine is and bank 2 will be the opposite side. It's named bank 1 and bank 2 so that no matter how the engine is laid out, bank 1 is always on the same side as cylinder 1. I cannot say whether the right hand or the left hand one will be bank 1 as I do not know where your cylinder 1 is. The garage should know


Posted on Sep 08, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1986 Answers

SOURCE: toyota mr2 roadster 2001 engine light on code po141 oxygen sens

bank 1 will be whichever side cylinder 1 of your engine is and bank 2 will be the opposite side. It's named bank 1 and bank 2 so that no matter how the engine is laid out, bank 1 is always on the same side as cylinder 1. I cannot say whether the right hand or the left hand one will be bank 1 as I do not know where your cylinder 1 is. The garage should know

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ENGINE LIGHT ON CODES P0141 & P0144


code p 0141 refers to heated oxygen sensor (HO2S) 2 bank 1--heater control--circuit malfunction===causes --wiring---HO2S--- ECM
code p 0144 refers to heated oxygen sensor(HO2S) 3 bank 1--high voltage ===causes wiring short to positive ---HO2S---ECM
also refers to oxygen sensor(O2S) 3 bank 1--high voltage ===causes wiring short to positive---O2S-- ECM
HO2S sensors are the units in the exhaust manifolds or before the cat converters
O2 sensors are after the cat converter
two completely different operations
use the special tool for sensors as the wires are easily damaged from the wrong tool use
as for misfiring you will get a P0300 (0300,0301,0302,0303 etc) depending on which cylinders are misfiring
when checking for misfiring the injectors , (blocked or not firing) are as important as plugs and wires
If the misfiring continues after sensor replacement , replace the ECM with a known good one as it is common to all fault codes and misfiring

Jun 06, 2016 | 2005 Hummer H2 SUV

1 Answer

Rich fuel mixture banks 1&2


Fuel sensors work in the hottest part of the exhaust and are difficult to remove after a period of time. Many mechanics apply a small amount of never seize to the threads to assist in replacement and future removal. However this affects the grounding of the sensor and can cause fault readings. Ask the mechanic if he did that and follow you idea that the sensors may aftermarket and not suitable for yoyr car

Jan 23, 2013 | 2002 Toyota MR2 Spyder

1 Answer

2002 MR2 fuel system too rich bank 1 and bank 2


Peter. The dealer did diagnose the problem. They said the car needed all 3 oxygen sensors replaced. They were replaced and the car is now returning codes p0172 and p0175 which are the only 2 codes coming up when the check engine light came on. My question is if the dealer sold me the incorrect oxygen sensors could this cause the computer to incorrectly set the p0172 and p0175 rich fuel mixture codes. There are no other codes coming up. My plan at this point is to check and clean the MAF, check my fuel pressure, and also the TPS but I did not want to waste my time if it could possibly be that the new oxygen sensors where the problem. Any help would be appreciated.

Jan 21, 2013 | 2002 Toyota MR2 Spyder

2 Answers

P0037. heater sen. where is it on the engine?


The code is for the heater in the O2 sensor bank one sensor two. That would be the sensor after the catalytic converter on bank one.
It could be the sensor itself or the power supply for the heater.

Aug 25, 2012 | 2006 Mazda MPV

1 Answer

1998 bmw z3 roadster 2.8 engine light came DTC code p0170


There is no one fix works on this O2 sensor code
P0170 - Fuel Trim Malfunction Bank 1
Possible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection

Jun 05, 2012 | 1998 BMW Z3 Roadster

1 Answer

What does the oxygen sensors look like in a 2003 Chevy Venture (warner Brothers Edition) ? How many are there? Where are they located? Can you show a picture of them in place? How do i replace them? Chevy...


There should be an O2 sensor before and after the catalytic converter on your vehicle, so it will have 2 sensors. You'll need a 7/8" open end wrench or an O2 sensor socket to replace them.

It'll look something like this: http://www.carsteering.com/data/all_images/48-01718.jpg

May 20, 2011 | 2003 Chevrolet Venture Passanger

2 Answers

What is that code PO141 AND PO342


Technical Description O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2)
What does that mean? This code means that the heated circuit in the oxygen sensor on bank 1 decreases time needed to enter closed loop. As the O2 heater reaches operating temperature, the oxygen sensor responds by switching according to oxygen content of the exhaust surrounding it. The ECM tracks how long it takes for the oxygen sensor to begin switching. It the ECM determines (based on coolant temp) that too much time elapsed before the oxygen sensor began operating properly, it will set P0141. See also: P0135 (Bank 1, Sensor 1).
copyscape.gif Symptoms You will likely notice poor fuel economy the illumination of the Check Engine Light.
Causes A code P0141 may mean that one or more of the following has happened:
  • open or short to ground in the wiring harness
  • O2 heater circuit wiring high resistance
  • O2 heater element resistance is high
  • Internal short or open in the heater element
Note: Typically a failed catalytic converter does not cause this code. You're more likely to see a P0420 code for a failed converter.
Possible Solutions
  • Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)
  • Repair short or open or high resistance in wiring harness or harness connectors

Dec 01, 2009 | 2000 Isuzu Rodeo

1 Answer

Toyota mr2 roadster 2001 engine light on code po141 oxygen sens


bank 1 will be whichever side cylinder 1 of your engine is and bank 2 will be the opposite side. It's named bank 1 and bank 2 so that no matter how the engine is laid out, bank 1 is always on the same side as cylinder 1. I cannot say whether the right hand or the left hand one will be bank 1 as I do not know where your cylinder 1 is. The garage should know

Sep 08, 2009 | 2005 Toyota MR2 Spyder

1 Answer

Trouble codes


Hi Sandra!
The trouble codes listed are defined as:

P0141 Oxygen Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)

P0300 Random/Multiple Cylinder Misfire Detected

P0331 Knock Sensor 2 Circuit Range/Performance (Bank 2)

PO300 & PO331 are possibly symptomatic of issues caused by PO141, which would have a direct influence on the air/fuel mxture... which could cause missing and knocking.

So the first thing I would try is replacing the Bank 2 Oxygen Sensor, after making sure the wiring and connections to that sensor are in good shape.

Does the engine show any physical issues such as loosing coolant, smoking exhaust, overheating? A blown or leaking head gasket on the #2 bank could also present these (among other)
codes.

Good luck and let me know how it goes!

WB

Jun 09, 2008 | 1997 Pontiac Grand Am

Not finding what you are looking for?
2002 Kia Sedona Logo

1,611 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...