- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
abmforum.com/audi-tt-sensors.html audi tt sensors 2004 audi tt coupe windows roll down hi all only new to forum 2001 ...2002 audi tt purchase advice newbie looking to get a tt. ... Used on cold starts towarm engine and cat faster. .... replaced and sending my car into limp mode. my ac just shut off one day and will not turn back on. the esp in the car is stuck off.
Hi, the safe mode usually has a time out feature with instructions in the book. Often leaving the ignition on and radio on for a pre set period will allow another chance at inputting the code.
IMPORTANT NOTE: You must have the security anti-theft code for your Audi Concert radio from the car manufacturer, or from an Audi dealer! You can find the radio code at: http://www.radio-code.co.uk/
The sequence of programming for a 2002 Audi TT Concert radio is: 1. Simultaneously push "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. For example: we have the security code "5079". Then: 3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted. 4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted. 5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted. 6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted. 7. Then simultaneously push again "SCAN" and "RDS" keys to confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready to use!
IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi TT radio is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. 3. By the #1 key you will set up the first safe code digit. 4. By the #2 key you will set up the second safe code digit. 5. By the #3 key you will set up the third safe code digit. 6. By the #4 key you will set up the four-th safe code digit. 7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer!For Audi Concert the sequence of programming is: 1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed. 2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. 3. By the #1 key you will set up the first safe code digit. 4. By the #2 key you will set up the second safe code digit. 5. By the #3 key you will set up the third safe code digit. 6. By the #4 key you will set up the four-th safe code digit. 7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Try disconnecting batt+ for 10 or so minutes and re connect battery but you will have to enter the security code if you enter it wrong it will lock. If you dont have the code you need to call service dept. with v.i.n.#
It is highly likely that the radio will have lost its security code whilst being disconnected from its power supply (your battery).
Any local dealer will re enter your code for you for a small charge unless you have the code stored in your radio user guide in which case you can re-enter the code yourself.
Turn on radio - the word SAFE will appear in the display. Press th
P.SCAN and RBDS buttons simultaneously and hold them down until "1000"
lights up in the display.Release buttons.Do not, under no circumtances,
continue holding them down or press them once again. This will cause
the radio to consider the number 1000 to be the input code.Use station
buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use
the button 1 to enter the first number 2 for the second number 3 for
the third number and 4 for the last number.Once you have entered the
code and it shows on the display,press the P.SCAN and RBDS buttons down
again simultaneously and hold them down until the word SAFE appears in
the display.Release buttons. Soon afterwards a frequency will be
displayed. PLEASE RATE THIS !!!
×