Question about 2005 Nissan Quest

Open Question

VDC light coame on

VDC light came on after hearing grinding sound

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why do I hear grinding noises while driving?


Hit in the rear axle may have damaged bearings or brake parts. Jack up the side you hear noise from, put on stand, then have helper rotate wheel while you look underneath and listen to see where noise is coming from. Use length of old fuel or heater hose, one end in ear, to locate exactly where noise comes from.

May 27, 2015 | 1996 Jeep Cherokee Country

1 Answer

What does Brake light,VDC light and slip lights on . This happened when brake pedal pulsates,but I do have brake pedal.


See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.

2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.

3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.

4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.

May 21, 2014 | 2004 Nissan Titan

1 Answer

I'm hearing a grinding sound underneath my suv when i press on the brakes. i replaced my brakes about 4 months ago


If You are hearing a grinding sound when you press on your brakes it probably has something to do with the brakes again so I would take it back to the place that replaced them 4mo ago and have them fix it cause they should be responsible for your brakes if you just paid them to replace them 4mo ago

Mar 21, 2012 | Kia Sorento LX Cars & Trucks

3 Answers

If i feel a grinding of my brakes after having my lower control arm and hub bearing replaced why am I steal feeling a grinding when I mash the brakes and it was from a rod connecter broke on the truck and...


I have a 2005 Nissan Pathfinder, the VDC light and the "Slip" light came on the dash, and the slip light was coming on while i was driving at the speed of 20 mph

Jun 24, 2011 | 2005 Nissan Pathfinder

1 Answer

My abs light is on and my trac off light is on. when i back up i hear a grinding sound and when i stop when going forward i hear a squeaking sound. can you help.


Sounds like it could be a failing wheel bearing, as the speed sensor is part of it. This will cause all of your issues. Get it checked out!

Apr 20, 2011 | 2003 Pontiac Grand Prix

1 Answer

2004 nissan maxima...can hear the abs pump while driving and sounds like grinding when braking at low speeds. Is this pump issue or sensor? What causes this to happen?


hi from uk the only thing i would be concerned about at this moment is the grinding when brakes applied ? this sounds very much like your brake pads are very low and most likely worne to the point of damage(grinding metal to rotor contact) is the sound you hear also the abs will sense this and due to unbalance of braking to each wheel abs will operate however i would have thought your car may have low pads warning indicator light system fitted but may not ? may i suggest considering age and possible high milage of your car ? if you have not had pads inspected recently? you do so asap b4 you drive any distance especially at speed ?

Feb 27, 2010 | 2004 Nissan Maxima

1 Answer

Grinding right rear


Take off wheel, brake caliper, pull brake disk. It houses the parking brake (drum type). Chances are the parking breke shoes are shot.

May 25, 2009 | 2004 Nissan Titan

2 Answers

99 ford windstar hear grinding when wheel turns


Mechanic replaced the rack and pinon that was leaking-that was the noise, air getting into the hose. The engine was a seperate problem and the IMP?? was replaced. The part was cheeper than the labor cost for this one!!

Jul 06, 2008 | 1999 Ford Windstar

Not finding what you are looking for?
2005 Nissan Quest Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...