Question about 2006 Pontiac Montana SV6
Rear shock torque specs for 2006 pontiac montana sv6?
can it be done without removing back wheels?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
Use a z clamp,Or us big azz pliers,Or use a hammer handle and put one of the old pad in and put the hammer handle in the and twist it will work.I hope this helps
Posted on Dec 13, 2009
SOURCE: Pontiac Montana SV6
For instructions on how to program remotes and keys check website below, I use these and they are usually very accurate. This website does state that on your vehicle, special equipment is needed to program a key fob, as there is no onboard programming for it. However, there are programming instructions for transponder keys.
Posted on Feb 15, 2010
Tips for a great answer:
Jun 17, 2016 | 2005 Pontiac Montana SV6
Jan 16, 2016 | 2006 Pontiac Montana SV6
Mar 02, 2013 | 2006 Pontiac Montana SV6
Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks
Nov 05, 2012 | 2006 Pontiac Montana SV6
May 18, 2012 | 2006 Pontiac Montana SV6
Jun 27, 2011 | 2006 Pontiac Montana SV6
Dec 10, 2010 | 2006 Pontiac Montana SV6
Feb 12, 2009 | 2006 Pontiac Montana SV6
78 people viewed this question
Usually answered in minutes!