Question about 2005 Kia Sorento

Open Question

I need wiring diagram for fitting a passenger door harness on a facelift (2007) sorento onto a pre facelift model,(2006)

Posted by on

  • djsld220 Sep 09, 2009

    nothing to do with a solution at all for a kia, total waste of time!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring or instalation diagram for 03 silverado


Download manual from the attached link: https://www.gmupfitter.com/publicat/2004_BB/2003_Beyond_LD_Electric_CK.pdf
http://alarmsellout.com/support/diagrams/vehicle/CHEVROLET%20SILVERADO%201988-2005.pdf

This may help:
http://www.automotivetroubleshootingsecrets.com/2003_Chevrolet_Silverado_1500_4.8L_No_Start_Stall.html

This may help:
2003-2006 Chevrolet Silverado Wiring Diagram:
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2003-2006 Chevrolet Silverado . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections.

PART COLOR LOCATION 12 VOLT CONSTANT RED (+) @ IGNITION SWITCH HARNESS STARTER YELLOW (+) @ IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 PINK (+) @ IGNITION SWITCH HARNESS IGNITION 2 WHITE (+), SEE NOTE #2 @ IGNITION SWITCH HARNESS IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 BROWN (+) @ IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) GRAY/BLACK (-) @ BCM, BROWN PLUG, PIN B2, SEE NOTE #3 PARKING LIGHTS ( + ) BROWN (+) IN DRIVERS KICK PANEL POWER LOCK SEE NOTE #1, (for BASE MODEL TRUCKS, SEE NOTE #4) POWER UNLOCK SEE NOTE #1, (for BASE MODEL TRUCKS SEE NOTE #4) DOOR TRIGGER GRAY/BLACK (-)(DRIVERS) and BLACK/WHITE (-)(PASSENGER), SEE NOTE #5 @ EACH DOOR MODULE, IN EACH DOOR DOMELIGHT SUPERVISION GRAY/BLACK (-) @ BCM, BLACK PLUG, PIN E, SEE NOTE #3 TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN BLACK/YELLOW to BLACK (-) @ STEERING COLUMN HARNESS TACH Any wire NOT, PINK, BLACK or BROWN (AC) @ IGNITION COILS or FUEL-INJECTORS WAIT TO START LIGHT DK. BLUE (-) @ INSTRUMENT CLUSTER, PIN A2 BRAKE WHITE (+) @ BRAKE PEDAL SWITCH FACTORY ALARM DISARM LT. GREEN (-) @ DRIVERS DOOR MODULE, IN DOOR, BLACK 26-PIN PLUG PIN 15 ANTI-THEFT GM'S PASSLOCK 2 ANTI-THEFT SYSTEM, SEE NOTE #1 @ IGNITION SWITCH EXTRA INFORMATION NOTE #1: This vehicle uses GM'S PASSLOCK 2 ANTI-THEFT SYSTEM that requires a 791 Bypass Module to Remote Start, if you are using a REMOTE STARTER ONLY, use the 791. IF you are installing a REMOTE STARTER with KEYLESS ENTRY you MUST USE the INTERFACE BYPASS MODULE, Part # DB-ALL or XK09, EITHER Bypass will do the Anti-theft and Keyless entry. If connecting a keyless entry only you can use the GMDL-BP. NOTE #2: The IGNITION #2 wire WHITE must be connected to prevent a CHECK ENGINE LIGHT from turning on and to prevent DAMAGE to the TRANSMISSION on this Vehicle. NOTE #3; The BCM is located under the Drivers Side of the dash, the BCM has 6 plugs on it, with the PURPLE plug on the back. NOTE #4: On BASE model truck the DOOR LOCK INTERFACE MODULE is not necessary, the LOCK wire is a LT BLUE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B5, and the UNLOCK wire is a WHITE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B10. NOTE #5: On BASE Model trucks, the Door Trigger wires are @ the BCM, LT BLUE PLUG, PINS B4 and A5. On 4-Door Trucks the LEFT REAR Door is a LT BLUE/BLACK (-) PIN A3 and the RIGHT REAR Door is a LT GREEN/BLACK (-) PIN A2, located in a PURPLE PLUG at the BCM, use all 4 wires and diode isolate when installing an alarm system.
03 silverado wiring diagram-dfydxumns33ohqc3bsmt22yf-2-1.jpg

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-4.gif

2011-03-28_044351_brakes_lamps_circuit_2003_2500_siverado-dfydxumns33ohqc3bsmt22yf-2-8.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-13.gif

chevroletsilveradohorncircuit_thumb-dfydxumns33ohqc3bsmt22yf-2-19.jpg

chevrolet-silverado-wiring-diagram-wire-diagram-dfydxumns33ohqc3bsmt22yf-2-26.png

collection-fuel-2003-chevy-silverado-wiring-diagram-estimation-information-standard-work-therefore-straight-swapped-dfydxumns33ohqc3bsmt22yf-2-34.jpg

drivers2-dfydxumns33ohqc3bsmt22yf-2-43.jpg

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-53.png

passen2-dfydxumns33ohqc3bsmt22yf-2-64.jpg

sensor-primary-2003-chevy-silverado-wiring-diagram-fuel-pump-plugs-solid-conductors-important-looking-more-channels-dfydxumns33ohqc3bsmt22yf-2-76.png

2011-03-07_083537_3-7-2011_12-28-24_am-dfydxumns33ohqc3bsmt22yf-2-89.png

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-103.gif

2011-05-14_175028_2003_stop_lamps-dfydxumns33ohqc3bsmt22yf-2-118.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-134.gif

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-151.png

Apr 16, 2017 | Cars & Trucks

1 Answer

Back door on the kia sorento 2011 passenger's side will not open, need help fast...??


Is it locked? The lock stuck in the locked position? Or is it something else. You might need to take off the door panel to disengage the lock. More info needed.

May 23, 2014 | 2006 Kia Sorento

1 Answer

Kia sorento 2006. Power lock door cannot open car's doors. Only close them.


wire to drivers door broken main door switch on drivers side is there a car starter sometimes they cut into wire harness and the wire breaks you can take the drivers door panel off and check the switch if it works or jump the wires to door locks but some models have a bcm in the front fuse box in engine compartment and all the relays and functions pass through it such as rear defrost doesnt work well the relay is integrated in the bcm so to fix it you have to replace bcm module which is the fuse box so be careful that the doorlock feature is not integrated into the bcm

Sep 16, 2013 | 2007 Kia Sorento LX 4x4

1 Answer

Looking for a diagram to replace spark plug wires for 2006 Kia Sorento EX 3.5


Are you sure it has wires check close it may use separate coils for each cylinder that replaces the need for coil wires.

May 19, 2013 | Cars & Trucks

1 Answer

Need a wiring diagram that will assist in installing a remote car starter for a 2003 4x4 kia sorento


12 VOLT CONSTANT GREEN (+) and BLUE (+) IGNITION SWITCH HARNESS STARTER RED (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 YELLOW (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 WHITE (+) IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) WHITE (-) @ HEADLIGHT SWITCH PARKING LIGHTS ( + ) RED/BLACK (+) @ DIMMER SWITCH POWER LOCK BLUE (TYPE B) IN DRIVERS KICK PANEL, at DOOR HARNESS POWER UNLOCK WHITE (TYPE B) IN DRIVERS KICK PANEL, at DOOR HARNESS LOCK MOTOR WIRE WHITE (+) IN DRIVERS KICK, at DOOR HARNESS DOOR TRIGGER RED/BLACK (-) DRIVER KICK PANEL HIGH IN BLUE PLUG DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires Part #775 Relay TRUNK RELEASE RED/ORANGE ( - ), Requires Part #775 Relay IN DRIVERS KICK PANEL, harness to rear of vehicle SLIDING POWER DOOR N/A HORN BLUE/BLACK ( - ) @ STEERING COLUMN HARNESS TACH RED (-) @ COIL PACK WAIT TO START LIGHT N/A BRAKE WHITE ( + ) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM ORANGE (-) IN DRIVERS KICK PANEL

Dec 21, 2009 | 2003 Kia Sorento

2 Answers

Fitting a wing mirror on the passenger side of a fiat punto


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 18, 2009 | 2006 Fiat 124

1 Answer

Replacing electric seats from a 1995 model into a 1997 facelift.


Technically, you can put any seat in any vehicle, as long as it dosen't interfere with anything. (door closing etc) As far as I know, most jeep seats interchange easily, At worst, you may need to drill a hole or two. Important part is before you begin, identify each wire in the harness, making sure that you know which one does what so if the harnesses don't match you can easily switch wires around. Write it down. Don't try to remember if you do great but if you forget, you can burn stuff out!!! If you need to cut wires, don't twist and tape...twist, solder then tape.
Good luck

Mar 15, 2009 | 1997 Jeep Cherokee Country

1 Answer

Need diagram for 2007 escape audiophile


if it is the wiring diagram for the Escape you need, here it is:

12 VOLT CONSTANT Connect to BATTERY ONLY STARTER TAN/LIGHT BLUE (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 LIGHT GREEN/PURPLE (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 BLACK/LIGHT GREEN (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 N/A KEYSENSE N/A PARKING LIGHTS ( - ) WHITE/BLACK (-) @ SJB, Connector E, Pin 4, See NOTE *1 PARKING LIGHTS ( + ) BROWN (+) @ SJB, Connector C, Pin 19, See NOTE *1 POWER LOCK PINK/WHITE (1-Wire System) See NOTE *2 @ SJB, Connector D, Pin 22, See NOTE *1 POWER UNLOCK Same wire, See NOTE *2 See DIAGRAMS DOOR TRIGGER PINK (-) @ SJB, Connector C, Pin 28, See NOTE *1 DOMELIGHT SUPERVISION USE DOOR TRIGGER TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN YELLOW/LIGHT GREEN (-) @ SJB, Connector A, Pin 14, See NOTE *1 TACH NOT RED or WHITE/RED @ IGNITION COIL or FUEL INJECTOR WAIT TO START LIGHT N/A BRAKE LIGHT GREEN (+) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM DARK BLUE/LIGHT GREEN (-) @ SJB, Connector D, Pin 3, See NOTE *1 ANTI-THEFT FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM TRANSPONDER @ IGNITION SWITCH TUMBLER EXTRA INFORMATION NOTE *1 The SJB (Smart Junction Block) is the FUSE/RELAY BOX on the PASSENGER SIDE of the CENTER CONSOLE. NOTE *2 This vehicle uses a 1-Wire Door Locking System, LOCK requires a (-)Negative thru a 1000 Ohm Resistor and UNLOCK requires a straight (-)Negative

Jan 06, 2009 | 2005 Ford Escape

1 Answer

Replacing driver's side mirror on Kia Sorento


These instructions are for a 2013 Kia Sorento (Passenger Side Mirror)



1) remove speaker cover on inside door panel:



3_18_2013_2_40_43_pm.jpg
2) Use a small screwdriver to pry it away from the door. Be careful of the paint:
3_18_2013_2_41_45_pm.jpg

3) The panel will expose the 3 main bolts that need to be removed:
3_18_2013_2_43_24_pm.jpg

4) The cable harness needs to be removed this is located behind the door panel. Remove the one screw behind the screw cover:
3_18_2013_2_44_56_pm.jpg3_18_2013_2_45_02_pm.jpg3_18_2013_2_45_08_pm.jpg

Once the one screw is removed it will allow you to move the door panel enough to get to the harness and the 2 bottom bolts.

Here is how the harness looks:



3_18_2013_2_46_36_pm.jpg
Once the harness is removed and the 3 bolts removed the mirror will come out.

Repeat the steps to re install your new mirror.

Dec 25, 2008 | 2004 Kia Sorento

Not finding what you are looking for?
2005 Kia Sorento Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...