Question about 2002 Chrysler PT Cruiser

2 Answers

I have 2002 pt cruiser Put new upper and lower

I have 2002 pt cruiser Put new upper and lower motor mounts on it. But the motor leans bad to the passager side and the bottom pully rubs the lower motor mount. Thats the reason I put on the motor mounts. Please help

Posted by on

  • Anonymous Mar 29, 2014

    I put a new trun sight blub it don't work

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

The main mount on the passenger side is very common for being bad yes it's a lot of work but u can't check this mount without removing it and every time I have has one vibrating this has fixed the problem for dodge neons as well

Posted on Jan 07, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 412 Answers

IT SOUNDS LIKE THE MAIN MOUNT IN FRAME ON PASS SIDE IS BROKEN..I HAVE NEVER SEEN ONE BROKEN BEFORE OR REPLACED ONE,BUT IT WOULD A FAIR JOB TO REPLACE..ALSO THE BOLT THAT GOES THRU FROM FENDERWELL MAY BE BROKEN..CAUSING YOUR PROBLEM..THERE IS A SMALL PLASTIC PLUG IN FENDER WELL..ABOUT AN INCH OR SO IN DIAMETER..THERE IS A TORX BOLT(T55)IN BEHIND PLUG..CHECK AND SEE IF IT'S NOT BROKEN..TRY TIGHTENING OR LOOSENING IT..IT MAY BE BROKEN OFF IN PLATE THAT IS BOLTED TO ENGINE..LET ME KNOW WHAT YOU FIND

Posted on Sep 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 pt cruiser it is getting gas and fire but the fire is weak


Weak spark could be bad coil(s) or ignition module. Even a bad groud strap can cause this, but most common is module.

May 04, 2015 | 2002 Chrysler PT Cruiser

2 Answers

How do change the motor mounts on a pt cruiser?


Ensure the quality of the mount. Also check the dynamic balancing of the engine, propeller shaft and the center bearing.

Aug 29, 2014 | Chrysler PT Cruiser Cars & Trucks

2 Answers

How to fix 2002 pt cruiser rough idling


Check on intake silicon gaskets, upper and lower. About $18 at autozone

Feb 22, 2012 | 2002 Chrysler PT Cruiser

1 Answer

I have a 2006 PT Cruiser. It keeps coding a P304. 4th cylinder misfire. I have replaced plugs, wires, coil, upper and lower intake gaskets. Its still coding and now the ck engine light blinks. Any...


CLEAN FUEL INJECTORS SEE IF THAT HELPS.IF NOT COULD HAVE BAD FUEL INJECTOR OR FUEL INJECTOR ELECTRICAL CONNECTOR COULD HAVE A SHORT.DO A COMPRESSION CHECK ON THAT CYLINER COULD ALSO HAVE LOW COMPRESSION DUE TO BAD VALVES OR INTAKE MANIFOLD LEAK AT CYLINDER NUMBER 4.

Jul 12, 2011 | 2002 Chrysler PT Cruiser

4 Answers

04 PT CRUISER HAS BUSTED MOTOR MOUNT. WHAT IS THE ESTIMATED REPAIR COSTS AND PROCESS OF REPAIR.


Theirs more than one mount and they cost 60 -125 at a parts store Most fair mechanics will just change the front one and send you down the road for less than $200 for one mount. The dealer will reconmend them all and their right if over 100 thou miles and get out $500-800

Aug 15, 2009 | 2004 Chrysler PT Cruiser

2 Answers

Describe your 2002 Chrysler PT Cruiser timing


Replace the belt at 100k with a new water pump pulley and tensioner. It would not be a bad idea while u r in there to replace the center motor mount. When the mount fails it is a pricey fix not a bad Idea to replace it since you have to remove it to do the belt.

Jul 04, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Engine motor mounts on 2001 PT Cruiser


Place a block of wood under the engine sump to prevent damage when you jack up the engine to take the tension off the mount. Make sure you do not jack the engine up too much as you might damage the exhaust,cooling hoses etc.

Apr 07, 2009 | 2005 Chrysler PT Cruiser

4 Answers

Is there any difference between '01 and '03 engine?


what you need is a Hollander book that tells you what the difference is in the engines there may be just little diff and it will tell you what you can swap .
and most salvage yard have these books and dont charge to look it up for you.
and dont let someone guess and say yes and then you have to go back and change so importaint part.
later
paul

Jan 02, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...