Question about 1991 Plymouth Laser

Open Question

Automatic,stalls when you stop at idle - 1991 Plymouth Laser

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

02 Honda Civic LX (automatic) randomly stalls while idling at a stop sign or light. Help?


check timing, adjust valve clearance, check vacuum leaks. these are some that need attention.

Apr 14, 2017 | 2002 Honda Civic

1 Answer

Why it stalls at stops and low speeds


accord stalling on every stop. (1/2) - EricTheCarGuy ...

www.ericthecarguy.com/.../8.../46884-accord-stalling-on-every-stop
The car runs good but stalls every time i come to a stop. ... a stop then it diesagain.only on the stops does the idle drop very low to the point of stalling.what ... only when I start slowing down and come to a complete stop RPM's go down and the cardies. ... The popular Honda Civic and Accord vehicles share many powertrain ...

1998 Honda Accord loses rpm/ stalls coming to a stop ...

honda-tech.com/honda-accord.../1998-honda-accord-loses-rpm-stalls-co...
Jan 10, 2013 - I just bought a 1998 4 cyl 2.3 L Honda Accord two days ago. ... 1998Honda Accord loses rpm/ stalls coming to a stop. .... Is clockwise high idle or low idle? all in all i probable rotated counterclockwide 1.5 or 2 turns. maybe this ...

1999 Accord, 130k+, stalls when slowing to a stop - Honda Accord ...

www.hondaaccordforum.com > ... > General > General Tech Help
Mar 10, 2010 - My fiancee's '99 Accord EX Coupe 4-cylinder automatic, with 130,000+ miles, has recently (in .... No low RPM & feeling like it's GOING TO stall.

99 Honda Accord - Strange Stalling Issues! HELP!

https://www.2carpros.com/.../1999-honda-accord-99-strange-stalling-issu...
My 1999 Honda Accord is having sporadic stalling problems. I've noticed a pattern. Itstalls while going slow speeds and stop and go traffic, etc. The engine just ...

Stalling or Low Engine Idle Speed Due to Dirty ... - Repair


Jan 02, 2016 | 1999 Honda Accord

1 Answer

F100 pickup stalls out when coming to a stop. It restarts and drives fine. I've rebuilt the carb., changed the fuel filters and line, and replaced the gas tank and sending unit. What am I missing or do i...


It might be the float but if you don't have any trouble getting the truck up to speed then it's likely fine. The trouble is more likely to be in the idle circuit. The curb idle should be 500 to 750 RPM depending on if it's standard or automatic ( higher for auto). If that's okay then you may have to play with the idle screws. Turn them both the same amount, 1/4 turn at a time. Turn them once and then rev the engine 2 or 3 times and let it idle down suddenly. You will have to re-adjust the curb idle to keep it at the right spot as well.
If the truck is an automatic, once you have it set up so it runs right then put it in gear and try again although that will probably only need the curb idle adjusted if it stalls. hope this helps.

May 09, 2010 | Ford F-100 Cars & Trucks

1 Answer

Idle is a problem. when coming to a stop, it


torque converter could be bad, causing the engine to stall.TD

Mar 10, 2010 | 1990 Chevrolet Celebrity

1 Answer

Idled high, replace IAC and PCV, now idles low and stalls


On modern day cars the parts that get fitted need to be adapted to the ECM using a decent diagnostic machine. I bet that this was not done and the car is now suffering as a result.
Something to try is resetting the ECU, simply disconnect battery for 10 minutes, reconnect, then start car from cold *without touching gas pedal* and leave idling until the rad fan comes on (this resets all the base idle settings) then take it for a drive - hopefully will solve the problem

Nov 18, 2009 | 1990 Dodge Caravan

1 Answer

1997 2.2L base Cavalier idles rough and randomly stalls


Have they checked your TPS sensor as this is the most common cause for rough idles and stalls...

Aug 21, 2009 | 1997 Chevrolet Cavalier

1 Answer

Car stalls at idle


the lock up converter is staying engaged when you stop have it scanned for trans codes may need lock up selinoid (tcc) or torque converter changed try putting it in neutral before you stop if it stays running this is probibally your problem

Jul 15, 2009 | 2002 Pontiac Sunfire

1 Answer

1990 Ford Probe 2.2 automatic stalls in forward, reverse OK


Sounds like a bad IAC (idle air control valve/sensor) that controls your idle when going from throttle to idle. If bad your idle will act crazy and can cause stalls easily. Pretty sure that's it.

Dec 20, 2008 | 1993 Ford Probe

1 Answer

Stalling automatic


You need to clean the throttle body and idle air bypass valve with spray carb cleaner, hold the idle high while you do this as the engine will try to stall, disconnect battery when done for 5 minutes then reconnect and drive a few days to relearn idle strategy.

Aug 31, 2008 | 1992 Ford Escort 4 Door

Not finding what you are looking for?
1991 Plymouth Laser Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...