Question about 2002 Jaguar X-Type

2 Answers

02 x type rear piston/caliber

Changing brakes on 2002 jaguar x-type and the read piston will not go back in. does anyone have a suggestion on how to get the back Caliber/piston in.

Posted by on

  • Gene Sep 09, 2009

    the read brake caliber is different from the front. C clamp will not work need a special tool to screw the piston in.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 574 Answers

Make sure ur top is off the brake fluid reservoir and take a c-clamp and tighten it up this will force the piston in.

Posted on Sep 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jaguar Master
  • 2,007 Answers

Use a "C" clamp. Put the threaded part inside the piston, and the other part behind, and screw it till it is flush. Or do you mean you tried that, and it just won't move?

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset brake lite on my 2005 X type jaguar?


which brake warning light is on? the xtype does not have pad wear sensors fitted. so i guess you mean the abs light or the handbrake light.more than likely its the abs light and the common problem is the reluctor rings on one or the other of the rear outer constant velocity joints corroded/ fell off get the fault codes out of the abs module to help.

Aug 22, 2015 | 2005 Jaguar X-Type

1 Answer

How do you change the rear brakes pads and a caliper on a 2004 XJ8?


you will need to 1st get a caliber turning set from harbor freight, it very cheap maybe 35-40 bucks...you need to raise both rear tires,crank the car put it in neutral so that the electric module releases the brakes from park position,then you disconnect the neg battery term.remove the tires, open the hood,remove the fluid reservoir cap,remove the calibers by the two bolts facing the inside,then remove the pads,then take the caliber tooland lock the two male nipples ends inside the female piston plates(u will see how the fit)now make sure the brace plate of the of the caliber tool is snug and begin turning the tool threaded side clockwise,and the bolt near the plate should be turned counter clockwise and each turn will turn the piston inside the caliber until its all the way flush with the inside of the caliber wall itself...then place the pads inside the caliber rotors are the same as removing from any other car,they may need a good tap with a hammer,some may have one alen head screw.But replace the rotors and pads.Once they are replaced,lower the car,reconnect the neg terminal,put the fluid cap back on,crank the car,pump the brakes and hold the center console lever upuntil the brake light goes off and u will hear the rear brake module engage.Hope this helps!

Sep 28, 2011 | 2004 Jaguar XJR-Series

1 Answer

2003 s type brake front pad - what tools are need to change the pads


the front pads are pretty straight forward,just a c clamp is sufficient to press the calibers,make sure the brake fluid reservoir cap is off when you do them..just unbolt the calibers from the rotors and they work the same as standard brakes,but the rear calibers at time will need a caliber tool to turn and press the piston simultaneously

Sep 03, 2011 | 2006 Jaguar X-Type

1 Answer

Need to replace rear brake discs and pads


YOU NEED TO REMOVE THE REAR WHEELS.REMOVE PARKING BRAKE CABLE CLIP FROM CALIPER DISCONNECT PARKING BRAKE CABLE.HOLD THE GUIDE PIN WITH A BACK UP WRENCH AND REMOVE UPPER MOUNTING BOLT FROM THE BRAKE CALIPER.SWING THE CALIPER DOWNWARD AND REMOVE THE BRAKE PADS.TO INSTALL NEW PADS.YOU HAVE TO RETRACT PISTON INTO THE HOUSING BY ROTATING THE PISTON CLOCKWISE.PUT EVERYTHING BACK VISA VERSA.

Feb 24, 2010 | 2002 Jaguar X-Type

2 Answers

How to change rear break pads on 2002 saturn l200


remove the two caliber bolts that hold it to the bracket,use a screw driver to put inside inspection hole and pull towards outside of car,now you can pull it off,pop the pads out ,put the new ones in,take a large pair of water pump pliers and compress the caliber piston back in the caliber the whole way,put caliber back on reinstall bolts and then do the other side,before starting car pump brake pedal back up this will push the piston back out against pads then you will have a full pedal again,

Jan 21, 2010 | 2002 Saturn L-Series

1 Answer

Break pressure


Make sure you are trying to bleed the system in this order (Right rear, Left rear, Right front, Left front). If you are doing this and still not getting pressure, you should check the brake lines going to the rear for leaks. If you find a leak, replace that segment of line, bleed the system again and problem should be solved.

Dec 31, 2009 | 2002 Jaguar X-Type

3 Answers

I can't retract the rear calper on my 2002 Jaguar X-type. I am changing the pads & rotor. vem


What are you using? A c-clamp or you hands? A c-clamp ussually works but can sometimes cause the piston to become ****-eyed in the caliper. Best bet is to use the proper tool or a c clamp. Both work good. If it won't retract with those, the piston is siezed. Time for a new caliper.

Mar 08, 2009 | 2002 Jaguar X-Type

4 Answers

Jaguar x type rear brakes change


On the rear brakes on this vehicle you have to screw the calipers in.

As the post above states for solid caliper pistons (which this vehicle has on the rear), there is a tool for this and you can rent it at AUTOZONE. ALSO REMEMBER, if you turn the brake caliper piston Clockwise and it does not go in, turn it COUNTER CLOCKWISE. I cannot remember which side is counter clockwise, but I think it is the left hand side (as you sit in the car).

Sep 23, 2008 | 2002 Jaguar X-Type

1 Answer

How do you change the rear brake pads on a X-type 2003 3.0 jaguar


there is a special tool that turns the piston back into the caliber or you can use a pair of needle nose pliers

Jul 23, 2008 | 2004 Jaguar X-Type

Not finding what you are looking for?
2002 Jaguar X-Type Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...