Question about Chrysler Voyager

1 Answer

Engine runs very rough

I have a 2000 chrysler grand voyager with a 3.3l. it started running very rough about 2 weeks ago. i changed the plugs-no help. i changed the fuel filter-no help. i put prestone total fuel system cleaner in tank-no help. still runs very rough. could it be the engine computer or ''brain''.
if so how expensive is it to replace or repair?

Posted by on

  • Lee May 11, 2010

    Is there a check engine light on or flashing...could be a bad injector or a blown head gasket,or an intake vac. leak..what did the plugs look like?did you get it scanned if check engine light was on? more info would help...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 246 Answers

If is runnig the PCM is not the problem,change the coil pack or the crancshaft position sensor.
the PCM is very expensive(500+) but they hardly go bad. PCM(power control mudule)

one more thing,have you tried the spark plug wires?

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler grand voyager


if it does not stumble/shudder after it warms up you got a dirty intake air plenum (thin brass blade looking thing after air filter) use some air intake cleaner with engine warmed up and running filter removed temp. spray entire surface till shiney again
if it does stumble after warming up you got a corroded ecm conector due to water infiltration there is a tech bullitin on this you can read on chrysler web site

Oct 16, 2013 | Cars & Trucks

1 Answer

Runs rough dies


change the fuel filter and check the fuel pressure

May 25, 2013 | Ford Expedition Cars & Trucks

1 Answer

How do I change the water pump on my 2000 chysler grand voyager


3.3 AND3.8 ENGINES TAKE OFF SERPENTINE BELT 15MM ON BELT TENSIONER . REMOVE 2 HOSES OFF PUMP. 5 ?BOLTS AROUND WATER PUMP. IT WILL COME OFF WITH ANTIFREEZE LEAKING OUT. HAVE DRAIN PAN UNDER . ALSO IT IS GOOD TIME TO CHANGE THE LOWER HOSES. REINSTALL WITH NEW GASKET, FILL SYSTEM, PUT HEAT ON HOT AND RUN UNTIL THERMOSTATE OPENS, AND CHECK FOR LEAKS, TORQUE IF NESSESARY ( ENGINE OFF)!!REFILL AT SIDE TANK

Sep 29, 2012 | 2000 Chrysler Grand Voyager

1 Answer

Why would my oil light be coming on and beeping even though I have a full oil reservoir?


if oil level is ok, your oil PRESSURE is dangerously low.
Either the wrong oil was used, or your oil pump is going bad.

Ill bet on wrong oil since you just had it changed,

Apr 06, 2012 | 2000 Chrysler Grand Voyager

1 Answer

I changed spark plugs now van wont start,i have changed coils still wont start,


Hello,
Was the van starting before you changed the spark plugs and coils?

Is the engine turning but not starting?

Please reply in comments so I can help you.
Thanks, Donnie

Feb 17, 2011 | 2000 Chrysler Grand Voyager

1 Answer

2000 Chrysler Grand Voyager shut off and will not start back


sounds like the fuelpump might of gone bad the frist thing i would do is to have the fuel preasure checked.start there

Jan 17, 2010 | 2000 Chrysler Grand Voyager

1 Answer

2000 chrysler grand voyager loss of power and engine shuts down at red light.


Sounds like you may have a fuel problem. First check the air filter, if the engine can't breathe it won't run, the filter is a little hard to get to on this van so it often gets overlooked. Does it idle rough, you may have a vaccum leak. How does it run once you get going? Is it low on power? There was an issue with the flywheels cracking and spinning on the crankshaft hub,(3.3 and 3.8 engines only), this would ****** the timing as the crank sensor is mounted in the bellhousing.

Aug 18, 2009 | 1998 Plymouth Grand Voyager

1 Answer

How to change spark plugs on 2000 chrysler grand voyager v6 3.3l


use a lift, let van cool or change front three while van is cooling and from the under side of the engine change the other last three. They can be reached easily. No need to remove plenium.

Jul 08, 2009 | 2000 Chrysler Grand Voyager

1 Answer

I forgot to put oil into my engine now my chrysler grand voyager is not running right now,it is now making a tapping noise,do i need a new engine and how much will it cost


When you say "tapping noise" it names off several problems, please clarify :)

- Can the car "turn over" (aka try to start)
- What do you mean it "doesnt run" it wont start - or - does it not drive forward/backward (but will start)
- When does this tapping noise happen?
- How hard do you drive the voyager?
- Can you do your own mechanic work (for small - medium sized projects)?

Apr 04, 2009 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...