Question about 2000 Subaru Outback

1 Answer

I have a similar problem, don't know what to do.

My 2000 Subaru reverse lights are out, replaced the bulbs but to know avail. Also my security indicator flashes like crazy when the car is off an has not yet been armed. What gives.

Posted by on

  • kmcneil18 Sep 09, 2009

    Its an automatic transmission. The security indicator is flashing 2 quick flashes constantly repeating the sequence. If this is the valet how do I get out of this mode?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 119 Answers

Standard shift? could be bad reverse switch in trans,alam could be in valet mode,is it flashing 2 quick flashes then repeating

Posted on Sep 08, 2009

Testimonial: "Thanks for the response, my vehicle has a automatic transmission, and its showing the two quick flashes on the security indicator. "

  • tamaz 68 Sep 10, 2009

    with driver door open hold unlock button on remote to get out of valet mode,for the reverse lamps make sure there is voltage at the sockets

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't have any reverse lights on my 2000 toyota avalon


if the bulbs are good, then check the signal from the transmission range switch.you can check that at the bulb socket with the park brake set, the key on/engine off and put trans in reverse. use a test light and check power in the light socket. no power indicates bad fuse, bad wiring, or bad range switch.

Jun 14, 2012 | Toyota Avalon Cars & Trucks

1 Answer

Reverse lights on Opel Corsa Classic 2000 model not working


check to see that when you put the car into reverse that it is hitting the switch and pressing it in properly, you may need to adjust the switch for it to make proper contact

Nov 20, 2011 | Cars & Trucks

1 Answer

Reverse lights don't work. replaced switch and checked fuse and bulbs 1997 subaru legacy


is this car an automatic transmission? if it is then you will need to check the gear selector switch on the transmission. I have seen one that would not properly engage for the park/neutral and reverse switches to function but the car was still drivable.

Sep 01, 2011 | 1997 Subaru Legacy

2 Answers

My back reversing lights wont work but the bulbs and the fuse are all good?


Hello and welcome to FixYa!

If that's the case then it's definitely a reverse switch issue. If the reverse switch is faulty, the reverse light won't work even if the bulbs are fine. It is located underneath the transmission where it triggers when reverse is engaged. Have it replaced and you'll be good.
Hope this helps and thank you for using FixYa! Have a good one!

Jun 01, 2011 | Suzuki Grand Vitara Cars & Trucks

2 Answers

Replacing brake light on a subaru outback limited wagon 2000


How To Install Replace Change Taillight and Bulb 2000-04 Subaru Outback

Apr 07, 2010 | 2000 Subaru Outback

2 Answers

2000 pontiac sunfire how to replace headlight bulb passenger side-samurai01@worldline.ca


two clips hold the headlight in place at the top...remove these and the headlamp will move forward enabling you to replace the halogen bulb (9007 at CTC)

Dec 09, 2009 | 1999 Pontiac Sunfire

1 Answer

How do you replace front right indicator bulb in 2000 subaru outback


the light has two screws just unbolt them and pull the light straight out to get acces to the bulb

Oct 29, 2009 | 2000 Subaru Outback

2 Answers

Change light bulb in fog light on 2003 subaru outback wagon


remove lower cover, remove cover on back of lamp and disconnect wire then unhook clip (clip just swings to the side) and remove bulb. dont touch new bulb on the glass part ,will weakin life of lamp. goodluck.

Oct 19, 2009 | 2003 Subaru Outback

1 Answer

No back up lights 2005 legacy subaru not fuses or bulbs


Could be reverse swt. on tranmission..find switch then turn on the ign. switch and use light checker to see if there is voltage coming out if not check wires going into switch if there is power there then replace reverse switch.

Jun 16, 2009 | 2005 Subaru Legacy

1 Answer

Subaru tribeca lights


DO NOT buy bulbs anywhere other than SUBARU as replacement. They are specifically long life bulbs. Yes, availlable in other brands in other stores and more cost efficient but not in the long run..

Apr 19, 2009 | 2006 Subaru B9 Tribeca

Not finding what you are looking for?
2000 Subaru Outback Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...