Question about 1993 Honda Prelude
Low / uneven idle problem can cause by a lot of components.
Dirty air filter
Dirty injectors + o-rings
Vacuum leak at intake manifold and vacuum hose.
Bad Idle Air Control Motor (IAC)
Low compression (170 psi + is OK)
Start cleaning and repair these trouble spots and see is there any improvement.
For more advance DIY'er then you may try this.
Use a can of Berryman carburetor clean to locate the vacuum leak.
SEE SAMPLE PICTURE HERE
This is a 20-30 minutes job.
Vacuum leaks can occur in following locations.
Intake manifold AND/OR vacuum lines.
Intake manifold is not accessible unless the engine head if off.
You can still check the potential leak by spraying some Berryman near the intake manifold.
Listen for rpm increase after you introduce the Berryman (FUEL) at idle.
Do the same starting from the brake booster unit (the round unit) on the drive side fire all.
Carefully listen for increase of RPM right after to spray the Berryman to the potential vacuum spot.
Get a friend to HEAR the ROM increase or monitor for RPM on the tech.
DO NOT AIM the Berryman into any heat source.
PLEASE RATE my answer if it is useful to you.
Posted on Dec 14, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 12, 2012 | 1992 Chevrolet S-10
Mar 23, 2011 | 1993 Honda Prelude
Nov 22, 2010 | 1993 Honda Prelude
Oct 20, 2009 | 1993 Honda Prelude
Apr 18, 2009 | 1993 Honda Prelude
Dec 29, 2008 | 1993 Honda Prelude
Oct 23, 2012 | 1993 Honda Prelude
174 people viewed this question
Usually answered in minutes!