Question about 1990 Nissan 240SX

1 Answer

Wiring ca18det to ignition

I just did a 240sx ca18det conversion into my 1986 R31 SKYLINE it was previously ca18s (twin spark carbuerator model). what wires do i run from ecu to ignition? i know i need a start signal a constant and a cupl other ignitions but dont know which wires i actualy need to use

Posted by on

  • rory_marlow Sep 10, 2009

    yea a station wagon. i had a rb25det to go in but i wouldv had to make complete engine mounts and brackets to fit. whereas the 18det bolted straight in. its a lightweight version r31 more similar to a s13 or 180sx can show pics if want? email?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Im a little confused u took a ca18det out of a 240sx and put it in a old skyline??? try going on nico forum for more info

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1986 chevy celebrity tec4 an have no fire from coil ive replaced coil checked fuses an have power going to coil still no fire


ignition will trigger if signal from crank sensor, with hei spark plug tester ,read to coil wire and spark plugs wire if spark , depends wich engine
if c3i coil and module the module could be the problems you can check it before replace
hope it helps

Mar 29, 2014 | 1986 Chevrolet Celebrity

1 Answer

My car wont start, i have tried starting fluid to no avail i have checked for spark and i have no spark it is a 92 240sx i tried changing the coil and still no luck , have not changed the ign control...


You would need a repair book with wiring diagrams to troubleshoot the ignition system. You would need to know if the coil and module are getting power to begin.

Jan 21, 2014 | 1992 Nissan 240SX Fastback

1 Answer

Hi I have a r31 skyline sedan that I'm trying to


Have you checked the other end where it connects into the gearbox housing?

May 29, 2012 | 1977 Nissan Skyline 2.4

1 Answer

Why is my car miss firing i replace the leads


Cap and rotor could be bad. also the points in the distributor could be bad.

Apr 22, 2010 | 1989 Nissan 240SX

1 Answer

1986 FORD BRONCO II - CRANKS BUT NO START - NO SPARK - REPLACED IGNITION MODULE AND HALL EFFECT SENSOR, ALSO TRIED A NEW IGNITION SWITCH. HELP


I just had the same problem, today, check the tan- lt green wire on the fuel relay that is located on the right fender, mine wasn't pushed in all the way, this wire shut down spark and fuel

Mar 01, 2010 | 1986 Ford Bronco II

1 Answer

Need to replace the front drivers seat in a 1990 Nissan Skyline


easy.Remove the mounting bolts at the front and rear of the seat 2 front,,2 rear seat should just come out

Oct 23, 2009 | 1990 Nissan Maxima

1 Answer

I need resurfacing specs for an rb25det flywheel please!!!!


Runout limit (on clutch disc mating surfaces) manual trans, 1.0mm, or 0.039 inch,

Mar 25, 2009 | 1992 Nissan 240SX Fastback

1 Answer

1986 Nissan Skyline - Electrical Problems


buy yourself a couple bottles of gas line antifreeze and add them to the gas tank for the misfire when it is cold. and locate all the relays you can find that control the issues you are having and replace them. don't forget the fuse/relay panel under the hood near the battery.


Robert

Sep 23, 2008 | 1986 Nissan Maxima

Not finding what you are looking for?
1990 Nissan 240SX Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...