Question about Hyundai Motor 2003 Elantra

2 Answers

2003 hyundai elantra gls abs/tcs light on

2003 hyundai elantra abs/tcs light on light went on after themostat overheated car overheat controlled brakes working

Posted by on

  • 1 more comment 
  • mommapapabea Sep 12, 2009

    CHANGED THEMOSTAT LIGHT IS NOW OFF THANK YOU EVERYBODY FOR ALL YOUR ADVICE

  • Anonymous Mar 20, 2014

    My battery light came on went back off came on later then the car went dead sat for a minute then the car cruck back up and what do tcs mean

  • Anonymous Mar 26, 2014

    how to reset the ABS light on a 2008 Hyundai Elantra

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 434 Answers

Two seperate problems. I would say you have a bad wheel sensor. A trip to a local big chain parts store will tell you. They will run a diagnostic and pull the code for free. Hope this helps...

Posted on Sep 08, 2009

Testimonial: "thankyou very much"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Unless you can discover what DTC (Diagnostic Trouble Code) has been recorded/set in the control module, it's anyone's guess.

Posted on Sep 10, 2009

Testimonial: "thankyou"

  • PAUL MC G
    PAUL MC G Sep 12, 2009

    replace the stop lamp switch.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is a/c drain hose on 2003 hyundai elantra gls


Look for a hose coming out of your firewall running down to the bottom of the car

Oct 17, 2016 | 2003 Hyundai Elantra GLS

1 Answer

The brake light is on along with tcs and abs 2003 hyundai elantra


tcsd and abs work of sensors on all wheels so check for wiring and connections
brake light ( on dash) can be low fluid level in the brake reservoir, hand brake still on
run the fault codes to find exact codes that are putting the lights on

Oct 10, 2016 | Hyundai Motor 2003 Elantra

1 Answer

Where is traction control relay located?


There isn't one. ABS or TCS light on. Have the ABS system scanned. Usually a bad wheel sensor.

Apr 12, 2016 | 2004 Hyundai Elantra

1 Answer

2003 elantra no power


Have u checked the main fuse in the car? Should b like an 80amper, good luck!

May 31, 2014 | 2003 Hyundai Elantra GLS

1 Answer

2000 elantra white smoke during speed, doesn't start


White smoke normally indicates steam, did the car overheat ????...if it overheated check hoses for leaks,,,, loss of water etc

Jun 13, 2013 | 2000 Hyundai Elantra GLS

1 Answer

I have a 2003 hyundai elantra. Both the ABS and TCS lights are on. I don`t know what to do.


This is most likely a problem in your ABS control module. Have it checked, after you check the brake pads for wear. The TCS warning will sometimes come on when the ABS brakes fail to function correctly or the pads are worn too far. This is caused by a brake not releasing as it should or if the caliper is extending too far to properly stop the vehicle. I would not delay in having this checked out as it could lead to brake failure.

Jan 02, 2011 | Hyundai Motor 2003 Elantra

1 Answer

Hyundai Elantra GLS 2003 starter does not work


it can if you have the proper tools and a little patience its not very hard at all it may be a little snug i cant remember off hand where the starter is located on that car but its relatively an easy fix.

May 21, 2010 | Hyundai Motor 2003 Elantra

2 Answers

2003 Hyundai Elantra GLS. Check engine light, code PO133


Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133

Feb 10, 2010 | Hyundai Motor 2003 Elantra

1 Answer

Reset the abs and traction contols system on my '05 hyandia elant


HAVE YOU TRIED DRIVING VEHICLE FOR A SHORT DISTANCE MOST CARS ARE LIKE THIS.

Dec 20, 2008 | 2005 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 2003 Elantra Logo

Related Topics:

1,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...