Question about 1993 Ford F250

2 Answers

How to change transmission oil on a 1993 ford f250 diesel 5 speed?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

Fluid - M/T: Fluid Type Specifications
The manual transmission models M50D; Borg-Warner T-18 and ZF model S5-42 each use Motorcraft MERCON© Multi-Purpose Automatic
Transmission Fluid XT-2-QDX or DDX (ESP-M2C166-H) or equivalent.

There should be a drain plug near the bottom of the transmission, the plug should be removed by inserting a 3/8" ratchet in the hole on the plug. Drain the oil.

There should be a similar plug higher on the transmission case, remove this and fill from there.

Posted on Sep 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

There is an oil drain located on side of tranny housing near speedometer unit. You will need the 90 weight containers with the long spout or a funnel. Remember this is messy and smelly so be prepared..:>)

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Ford F250 I start it and warm it up, then turn it off, then try to restart it and it won't??


Diesel or gas ? Showing rpm's ? Got oil psi ? Need more info to help you out

Apr 01, 2014 | 1993 Ford F250

1 Answer

Where is the speedometer sending unit located 1993 ford f250 XLT 4x4


My parts book shows a speed sensor in the side of the transmission where the cable used to be.

Sep 29, 2012 | 1993 Ford F250

2 Answers

I have a problem with my 1993 ford f250, there is hard shifting in the transmission, what could be the problem?


how long has it been since the fluid and filter been changed, also check to make sure that the transmission mount bolts are tight.

Feb 18, 2011 | 1993 Ford F250

1 Answer

I need to know where the oil sending gauge is in a 1993 ford f250


Oil pressure switch location - 4.9L engine

tecnovative_92.gif
Oil pressure switch location - 5.0L/5.8L engines

tecnovative_93.gif
Oil pressure switch - 7.3L diesel and 7.5L gasoline engines (adapter is for 7.3L only)

tecnovative_94.gif

Feb 04, 2011 | Ford F-250 Cars & Trucks

1 Answer

2001 f250 diesel supercab transmission works good when cold but after you drive for about 4 or 5 miles & stop it will not shift properly & seems to slip except in d1 truck has 190k is full of oil


ok, if it's full of oil, but hasn't been flushed every 30k mi. then I would have the service performed for the transmission.

It may cost about $100 or more to do this.

If, however, the slippage doesn't go away, you're looking at another transmission, or a rebuild which is fairly costly, in the thousands.

Hope you can fix this problem economically.

Jul 10, 2010 | 2001 Ford F250 Super Duty Super Cab

2 Answers

Trying to find out how much oil the Triton V-10 takes when I do my oil change? I cant seem to find it or anyone who knows


It should be listed in the owners manual, but because of different oil cooler setups you may have to do the change yourself and add oil until the correct level is established..... for the first oil change.
Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and fill to full.
Note the amount needed for next time.

Nov 08, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Where is the Speed Sensor on a 1999 Ford F250 7.3 L diesel 4x4?


Check ontop of the transmission bell housing. I believe there's an orange wire going to it.

Jun 07, 2009 | 2002 Ford F250 Super Duty SuperCab

3 Answers

Hesitation while holding accelerator steady


Hi, I had that sort of problem with my 98 wrx when I was on the open road & try to keep the same speed.Turned out my O2 sensor was faulty.A mechanic shop who got an oscilloscope can check the sensor(s) . I`m not sure how diesel works but I assume thay have O2 sensors too. Hope that helps.

May 09, 2009 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
1993 Ford F250 Logo

933 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...