Question about 1992 Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The hose that goes from the radiator to the front of the motor. There are two bolts on the engne block. The thermostat is located in there.
Posted on Dec 20, 2008
Same as 2 dr, or a stick.
There are bezel screws that hold the plastic trim (pointing up towards the windshield), you nee to remove these 2 screws. The bottom section is clipped in. Tilt the steering wheel down as far as it will go.
Once you have the bezel off, there are 4 screws holding the cluster to the dash. Remove them and gently pull the cluster forward. Reach around (expect to get scraped knuckles) and unclip the speedo cable, and two large multipin connectors. Don't force anything.
Getting the cluster out after this point is a test of your patience. It only seems to come out one particular way.
Posted on Aug 22, 2009
Tips for a great answer:
Feb 09, 2012 | 1992 Honda Accord
Jan 10, 2018 | 1992 Honda Accord
Jul 19, 2010 | 1992 Honda Accord
Jan 26, 2010 | 1992 Honda Accord
Oct 18, 2009 | 1992 Honda Accord
Sep 22, 2009 | 1992 Honda Accord
Jan 09, 2009 | 1992 Honda Accord
36 people viewed this question
Usually answered in minutes!