Question about 2000 Ford Focus

1 Answer

My lights will not turn on sometimes with the switch i have to mess withe the dimer switch to get them to work and my blinkers dont work sometimes what could be the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Unfortunatly it is in your dimmer switch. You will need to replace it. It is fairly difficult..but if u choose to try yourself i will try to walk u thru.:)

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 81 chevy k10. My brake lights, tail lights and blinkers dont work in the rear. I checked the wiring and when I have the blinker on every wire shows its running of the blinkers. My dimmer switch...


When you check them, with say a test light and they work. It is because you have a good ground with the test light. Check and rerun ground wires if necessary On the back of the truck, check for ground straps from the frame to the bed..

Dec 18, 2014 | Cars & Trucks

1 Answer

Blinkers, highbeams, autolights and other circuts


You have bad switch if it were a bcm you would lose all of your lights

May 17, 2014 | 2005 Chevrolet Colorado

1 Answer

My dash lights are goin when I start to drive the car it's not the fuse because they on wen it start prolly ghetto wiring it just broke yesterday


my guess its the switch does it have a dimer to raise and lower light level? mess with it roll the switch see if it comes on accidently and if it does start with that switch.. auto supply probably not to expensive good, luck

Dec 14, 2012 | Cars & Trucks

1 Answer

I have a 1991 mazda 323 and the right front and rear blinker does not work however the leaft blinker does


When you turn on the right blinker does the indicator light come on? It could be a faulty turn signal switch. The turn signals are routed through the hazzard switch, sometimes you can switch on and off the hazzard switch several times and the turn signals could start working again...Hey it's worth a try..

Mar 15, 2011 | 1991 Mazda 323

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

1 Answer

94 dodge dakota electrical diagram,electric brake hookup.there is 6 wires off the brake switch witch one do I hoke the switching wire from the syncronizer to?


in my 94 dodge dakota when i turn my lights on sometimes all extior lights work and dash one dont and when i turn my blinkers on all my gauges bounce with the blinkers its weirdd

Nov 19, 2009 | 1994 Dodge Dakota Club Cab

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

1 Answer

Blinker sometimes doesnt work and makes strange sound


Sounds like a problem with the turn signal switch.

Aug 18, 2009 | 2006 Ford F-150

1 Answer

Blinkers work except when.......


Sounds like you have a ground problem on the lights.
I'm assuming that the front lights that don't work are the directionals.
You might want remove one then turn on the headlights and try a temporary ground wire to the black wire. If it works then either check your ground wire from the battery to the chassis or install a separate ground wire the the light assembly.
As far as blinking fast, make sure all your lights are working. If one bulb is out that could be the problem.
Replace the dimmer switch.

Oct 02, 2008 | 1985 Jeep CJ7

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...