Question about 2006 Buick Rendezvous

1 Answer

2006 buick rendezvous is making a rubbing sqeaking noise from front, all wheel drive, anti lock break and ABS lights all came on vehical only has 34,000 miles on it and breaks and roaters were replaced last november any ideas what this might be

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Buick Master
  • 1,564 Answers

It is possible that something(road debris) has lodged between your ABS sensor and the rotor fins that report to the ABS computer.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHEEL BEARING REPLACED NOW THE AWD AND ATL LOCK LIGHT ARE ON AND MY CAR WONT GET PAST 30MPH, IF I TRY TOO FAST


Buick Rendezvous Service Traction system and Anti-Lock warning ...

forums.edmunds.com > Buick > Buick Rendezvous
Jul 15, 2007 - 31 posts - ‎19 authors See Also: Buick Rendezvous FIX Trac Off ABS warning light DTC sensor hub wheel.... For the service traction,ABS,AWD lights it may be a wheel speed sensor (also .... I drive a 2004 Buick Rendezvous with about 120K miles.Missing: atl

Sep 12, 2015 | 2004 Buick Rendezvous

1 Answer

The AWD disable light and Anti lock warning light is on


You will need to have your ABS system scanned. It is very common for the wires to break at the wheel speed sensors.

Feb 02, 2013 | 2003 Buick Rendezvous

1 Answer

Awd disable and anti lock light is on and a grinding noise in the front end


Hi, I can help

You have a bad wheel bearing assembly.
The bearing is starting to seize up, and it is telling computer there is a problem in ABS system, as well as AWD system.

First thing is to locate which bearing it is in the front end of the vehicle.

1)Jack up each side of the front end, place a safety support stand or jack stand under frame of vehicle.
2)Once vehicle wheel is free from ground spin the wheel and listen for grinding.
3)Compare each wheel as you spin and make your best judgment on which is more noisy.
4)This is your problem wheel you need to remember which side of the vehicle is the source of problem when ordering the part from your local auto parts store.

To repair: Remove wheel, remove brake caliper, then brake caliper bracket, then the rotor, remove center axle nut, then remove bolts for wheel bearing hub assembly.
Your ABS and AWD lights will reset themselves upon successful test drive following repair.
Let me know if you need more assistance or pictures.
Good Luck, have a great day.

May 07, 2011 | 2006 Buick Rendezvous

1 Answer

When i press on the brakes it makes a crack sound and also the awd light is turned on and anti-lock light is turned on


I would look into a possible wheel bearing. Most also incorporate the abs sensor in them. (Anti-lock)

Aug 11, 2010 | 2002 Buick Rendezvous

2 Answers

My anti lock bracks sometimes will start kicking and then stop. also after about ten minutes of driving the "service traction system" light will come on eventually will go out and the "abs" light and the...


i had this problem , to make a long story short buick had a recall on the hubs wearing out . after several time of replacing the hubs buick got involved a found the was a short in the system

May 26, 2010 | 2003 Buick Rendezvous

1 Answer

Front end squeaking possible rotor rubbing something.


Have you checked the metal clips that olds the brake pads in the front galiper bracket. They usualy rust, break loose and come in contact whit the disc, creating a squeaking noise. Those should be replace since they are needed for the brakes to work properly

Jun 24, 2009 | 2007 Buick Rendezvous CXL SUV

1 Answer

Anti lock light came on


You have a serious brake problem, most likely the front brakes are metal to metal, have it inspected ASAP, many brake shops and tire stores do this for free.

Apr 07, 2009 | 2004 Buick Rendezvous

1 Answer

Traction system


Hi there.Whats happening here is an abs sensor in the wheel has failed.In doing so it will turn off your traction control because your abs breaks and traction control work together .If maybe you have an auto zone near by they can scan your break system to find what abs sensor is causing the problem.I hope this clarified some for ya..Auto zone will scan the car for free so that won't cost you anything.You can drive the car you just wont have abs and you should get it fixed.Again I hoped I helped you and if you need further assistance I'll be here to help you..Have a great day..

Mar 31, 2009 | 2002 Buick Rendezvous

3 Answers

Buick rendevousz headaches


I own the 2002 Buick Rendezvous CX and I've encountered the same problems listed here. The ABS / Traction Control Lamp stays on and was throwing a code for the left wheel speed sensor as well as an anti-lock brake code (both in the wheel bearing hub assembly). I replaced the left and right front wheel hub assembly yet this did not eliminate the abs codes. 
Ultimately, I traced this problem to a break in the wire that leads to the left hub assembly. Although the sensor was properly connected, the wire (which is encased in a plastic housing) was broken. This is the wiring which leads from the abs wiring harness under the hood down to the left wheel abs sensor. 
I would suggest that you simply remove the left wheel and inspect the wire that leads to the abs sensor (there is only one wire on each wheel). Mine literally fell apart when I removed the plastic housing around the wire. I spliced the wire together and put it back in the plastic housing. After this, my abs codes disappeared and my anti-lock brakes began working again!
This is a simple fix that many people spend $1000 + on by replacing the hub assembly which does not fix the problem.

Aug 20, 2008 | 2002 Buick Rendezvous

2 Answers

My anti-lock brakes keep kicking on when i was driving last night then the light turned on and the awd disable light when on.


are awd light came on a few day ago...no change in the driving behavior. just had two wheel bearings replace last year. any idea what the awd disable light means now?

Thanks,
jim

Jul 31, 2008 | 2003 Buick Rendezvous

Not finding what you are looking for?
2006 Buick Rendezvous Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...