Question about 2005 Dodge Ram 1500

2 Answers

Egr valve location on dodge ram 2005 4.7

How to locate and change egr valve?

Posted by on

  • Anonymous Mar 15, 2014

    scoin xb EGR valve location

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

egr valve location on dodge ram 2005 4.7 - f0255cf.jpg

  1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Disconnect the vacuum line from the air cleaner assembly.
  3. Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Remove both the air cleaner hosing lid and base.
  5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
I hope help you with this. Good luck.

Posted on Sep 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

An egr valve is usually on or next to the inlet manifold. Usually fixed with one or two bolts, with a wire connector on top. They can be improved by cleaning wth carburettor cleaner, since they get sooty.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WERE IS THE EGR VALVE AND HOW DO YOU CHECK IT ON A 2005 DODGE RAM 1500


Located towards the back of the engine,sending a picture. You can remove and clean them, also clean the port, but unless you are getting really bad gas mileage, your truck is to new for cleaning this part. What was the code? There are other things that will set an EGR code. let me know Randy9_29_2011_6_30_31_pm.jpg

Sep 29, 2011 | 2005 Dodge Ram 1500

1 Answer

I cant locate the egr valve on a 1998 Dodge ram 1500 5.2 L


An EGR valve assembly located at the front of the intake manifold. The EGR valve is a poppet style valve (on/off only) and is controlled by an internal diaphragm.

af91f0c.jpg

Fig. EGR location and associated components-California diesel

Hope helps (remember to rate this and comment ).

Sep 14, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Where is the egr valve on a 2005 dodge 1500 5.7L


The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.

2efe0f8.gif

Disconnect electrical connector (1) from EGR solenoid (2). Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly.

Remove two mounting bolts (2). Separate valve assembly (3) from cylinder head (1). Remove and discard metal gasket located between cylinder head and valve assembly.
The new EGR valve will come with a new metal gasket. You can reuse the smaller gasket for the metal pipe going to the egr valve as long as its not damaged.

TY for using Fixya; remember rated this post.

Apr 14, 2010 | 2005 Dodge Ram 1500

1 Answer

2006 dodge ram 1500 agr valve where is it located and any pictures of it


5.7 L engine it's on the front of right cylinder head next to alternator
4.7 L engine it's on the rear of left cylinder head
no egr valve on 3.7

Mar 11, 2010 | 2005 Dodge Ram 1500

1 Answer

Need to replace egr valve. where to locate and how to repair



Wish you could have also included the engine size.

Most popular engine is the 5.7

EGR Location:

Located on Right side of engine behind and below alternator.

Recommend you purchase a new one and it will then be easy to locate.

Hope this tip helps.

r/David

Feb 18, 2010 | 2005 Dodge Ram 1500

1 Answer

2005 Ram 1500 4wd HEMI PO406 - EGR


Hey greenlee99, your best bet would be to grab one these manuals so that you have pictures and diagrams along with step by step instructions. It will tell you what tools and parts you need. Can't go wrong with having it.

Feb 15, 2010 | 2005 Dodge Ram 1500

2 Answers

Egr valve problem?


egr is under warranty for 100.000 miles

May 28, 2009 | 2005 Dodge Ram 1500

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

1 Answer

EGR Valve location


4.7 does not use an egr valve

Jan 05, 2009 | 2002 Dodge Ram Maxi

2 Answers

EGR valve


I'm not sure, i think it's located between the filter and the intake manifold

Jun 19, 2008 | 2005 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

4,013 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...