Question about 2002 Ford E350

2 Answers

Brake lights not working on 2003 E 350

Brake lights not working on 2003 E 35. All other lights, including emergency flashers work

Posted by on

  • michaelja20 May 11, 2010

    due park lights com on? did you check you fuse box for blown fuse?

  • yadayada
    yadayada May 11, 2010

    have you tested the brake light switch?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

Have you checked the fuse for the brake lights and have you checked the brake light switch.
The brake light switch is directly above your foot when it is placed on the brake pedal.

Posted on Sep 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

Check your brake light fuse and the bulbs in the rear of the truck. Some bulbs handles more than one function. Open the back doors of the truck and on each corner twist out the bulb holder and check the bulbs for burn out or a wire element loose in the bulb. I always change the bulbs anyway.

Posted on Sep 07, 2009

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

seans46
  • 161 Answers

SOURCE: 97 crown vic turn signals , emergency flashers and brake lights d

have the multifunction switch checked and the flasher.

Posted on Jun 15, 2009

  • 491 Answers

SOURCE: 1965 ford mustang...rear turn signals, rear emerg

Are the rear bulbs OK?
Is the ground good at the rear?are the sockets good?
Are there tail lights and a license plate light?then the ground is OK.
All the things that you say do not work go through the signal light switch....it may need replacing.
First make sure the bulbs and fuses are OK and power is getting to the signal light switch and to the brake light switch.
Nice car!

Posted on Aug 31, 2009

csmock132
  • 4669 Answers

SOURCE: Emergency Flashers totally out, Rear lights malfunctioning

Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 S10. My rear turn signals work, emergency flashers work, and my 3rd brake light works, but my tail light brake lights don't work. What do I do?


Check for power and ground to the lamps. Most likely you have lost ground, since you replaced everything else.

Sep 09, 2014 | 2003 Chevrolet S-10

1 Answer

1995 GMC Jimmy brake lights not working


Brake lights run through the hazzard switch. There are known problems with this, and the multifunction switch. You may need to buy a new hazzard switch and OR the multifunction switch. Before you do that, check the pigtail that goes into the brake switch up by the fender, make sure it's not shorting out up there. Happened to me!

May 06, 2017 | 1995 GMC Jimmy

1 Answer

Control ?i have a 1997 s10 pick signal flashers ( right and left ) stopped working, fuse replaced no go, all other electrical working ( brakes /emergency flashers etc) what do you suggest mission


The flasher may have gone bad for the turn signal, and there may be a second flasher for the emergency flasher lights. Look and listen for a click of the flasher for the emergency flasher lights. Then, the other flasher is the one to replace.

Good luck on this repair.

Dec 18, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

No brake lights or emergency flashers. Changed


Try adjusting the brake light switch on the brake pedal.

The flashers have a relay in the circuit, test it and see what you get . The flasher switch may be the culprit also. By pass the switch with a pair of jumper wires and see if flashers work.

Apr 24, 2010 | 1991 Jeep Cherokee Briarwood

1 Answer

I have a Pontiac Sunfire 2003, and the blinkers sometimes do not work even though I have activated them. The only way to get the blinkers working again is to turn on the emergency flashers, and then they...


Hello Goddard.
First thing is to verify all of the bulbs involved in the turn signal circuit are working. This will include the side marker lights. If they don't ll work the current flow may not be enough to properly activate the flasher.
Next on the list is the flasher unit itself. It is mounted on the bracket near the emergency brake pedal. Replace it, the contacts may be losing continuity and the emergency flashers would draw more current making it work.
Next would be the the signal switch itself. There may be some worn contacts and moving the emergency switch could position the contact point slightly enough to allow continuity.
If you would like more assistance on this leave me a message in "add comments" and I will check back.
I hope your repair goes well for you.

KL

Dec 29, 2009 | Pontiac Sunfire Cars & Trucks

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

Emergency flashers remain constant ON when the brakes are applied


It is as intended. If you check with everyone else, their car does exactly the same thing!!

Oct 09, 2009 | 1987 Ford Ranger

1 Answer

Emergency Flashers totally out, Rear lights malfunctioning


Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Sep 03, 2009 | Ford Super Duty Cars & Trucks

2 Answers

Rear brake lights stopped working


Check your fuses of course,you probably did.Listen your not going to believe this,the wire at the brake light switch can be bad.sometines the wire can break inside the vinyl cover just a milameter.use a test light for presence of voltage at the switch and check a few inches back to see it voltage is present. MAKE SURE YOU HAVE VOLTAGE AT THE SWITCH!

Jul 23, 2009 | 1992 Cadillac Eldorado

1 Answer

Changing emergency flasher switch


Disconnect the battery for 1 hour before you start and the air bag will be safe, be very careful when removing it, they are still an explosive device.

Sep 17, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
2002 Ford E350 Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...