- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, welcome to FixYa.com my name is Shawn and I will be answering your
They have an individual coil for every plug on this engine. Do you have a check engine light on if so if you retrieve the code it should be a P030X misfire code the X being a number between 1 and 8 identifying the cylinder that is misfiring. #1 being the passenger side front - #4 passenger rear #5 driver front #8 driver rear. They go in order 1-4 passenger side 5-8 driver side. If this is a 6 cylinder then coil 1 would be the passenger side front coil 3 would be the passenger side rear. Coil 4 would be the Driver side front and 6 would be the driver side rear. The coils are located under the center cover on the valve coves.
I hope my assistance helped you and resolved your
concern, if you need further assistance please ask.
if you have the V8 gas engine, the cylinders on the passenger side from front to back are #1 #2 #3 #4 the cylinders on the driver side are from front to back #5 #6 #7 #8. if you have a V6 gas engine the cylinder placement is passenger side from front to back #1 #3 #5 the cylinders on the drivers side are from front to back #2 #4 #6. if you have a diesel V8 engine the cylinder placement is passenger side from front to back #1 #3 #5 #7 drivers side from front to back #2 #4 #6 #8 and last but not least if you have the V10 the cylinder placement is passenger side from front to back #1 #2 #3 #4 #5 and driver side from front to back #6 #7 #8 #9 #10.
You have dual zones that are controlled by temperature actuators the passenger side has lost its memory or has gone bad you can put it in self programming by disconnecting the battery for ten minutes then hook it back up start the truck turn the temperature control on but do not touch any other controls let it go thru the self programming for about 6 to 7 minutes then select your temperature you want if it still does not work properly you may have a bad actuator or a bad connection at the actuator
I had the same problem on my 2000 Jaguar S Type 6 cylinder. Finally I changed out all 6 colis (bought them at $250 for 6 on-line). Biggest problem is installing them. The 3 cylinders on the driver's side are easy to do, as they are fitted under the plastic cover. The other 3 cylinders on the passengers side are a problem. You have to remove the exhaust manufold, which is not all that easy. I believe I had to remove about 12 to 14 bolts, many clips and clamps, but finally the car is purring like new again. (PS the exhaust manufold is that big silver / aluminum unit sitting on top of the engine, extending towards the passeger's side of the engine.