Question about 2001 Renault Sportwagon

Open Question

I cant input radio code - 2001 Renault Sportwagon

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Input Code


download blaupunkt radio code generator
BlaupunktCalculator1.0.exe
http://www.ziddu.com/download/590988...or1.0.exe.html
install the software in your computer
take out your radio and put the radio code starting with bp on to the software and it will show your code
plug the radio back in press as button untill code comes up and input your code using 1234 buttons on the radio and press and hold as button untill it turns on the radio

May 16, 2013 | 2004 Holden Astra

1 Answer

I replaced the battery now the sound system wont come on and i cant locate the fuse, is there an inline fuse


The audio system wont come on because you have to input the security code on your radio. The code is written on the papers of the car.

Sep 05, 2010 | 2002 Ford Taurus

1 Answer

Bought a 2000 nubria daewoo and the seller did not give me the ra


You can obtain the code from daewoousa. Remove radio and get serial number from radio (white strip with black numbers on radio) Email this to daewoousa and they will email back your 4 digit code. To input code, disconnect the NEGATIVE battery cable, pause, then reconnect. Your radio face will now flash "code" Input the 4 digit code given to you. Radio will play after about 15 seconds.

Jun 11, 2010 | 2000 Daewoo Nubira

1 Answer

1998 bmw z3...put a new battery in..asked for code..managed to obtain code but cant turn the volume up..seems muted yet shows the radio stations (display is very faint)


I hate to say this, but I doubt the radio or battery has much to do with it.
This is just a wild guess, but I would suggest you get a voltmeter and check the alternator output.
It should be 12.5 at idle, but over 13.5 when reved up.
If the radio is weak output, it seems to me it is getting less then 12 volts input, or else it had blown internals.
Another possibility is that a door speaker wire may be shorting and draining radio power.
Hard to guess.

May 17, 2010 | 1998 BMW Z3 Roadster

1 Answer

Cant switch on radio - says: ''code 1''


The radio alarm has been tripped. Any loss of power to the system will cause this to happen. It wants you to input the 4 digit code to reset the radio. If you do not have it, you can pull the stereo and get the serial numbers, and ask the VW dealer for the code. It should be free info if you supply the serial numbers.
With the power on and SAFE showing on the display, press and hold the MODE and SCAN button together until SAFE changes to 1000. Release the buttons and using the first four station buttons enter the radio code.
Use button #1 to change the 1 to the correct code, pressing once will change to 2 twice to 3 etc
Use button number 2 to change the next number etc.

When you have entered the correct code; press and hold the SCAN and MODE buttons together until code disappears and radio comes on.
I hope this may help.
Good Luck!

Feb 21, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Just bought audi a4 tdi w reg cant input anything


try puling the fuse out of the back of the radio and then letting it sit for an hour then you have to push a sequance of buttons to put the radio code in so it will unlock

Sep 17, 2009 | 2000 Audi A4

1 Answer

2002 Boxster - Trouble with the radio code. I


what is code for my radio in my porsche boxster 2002 2.3. I took off my car battery / my radio will not turn on now... please help me

Apr 05, 2009 | 2002 Porsche Boxster

1 Answer

Aux input location


Though I'm sure there is an AUX button on the radio, there isn't actually an auxillary port on a 2007 Grand Prix stock radio.I'm sorry to say, but you would have to get an aftermarket radio.

Mar 11, 2009 | 2007 Pontiac Grand Prix GXP Sedan

1 Answer

How do you input radio code in a 98 honda accord


Disconnect your battery for fifteen minutes, then use the stereo's preset buttons to enter the code. If you're getting a "code e" (indicating that the system is locked), I've been told that leaving the deck powered on for one hour will unlock it. Otherwise, you have to stop by a dealer to have it cleared/programmed. MOST dealers will do this for you at no charge.

Jan 15, 2009 | 1998 Honda Accord

1 Answer

Radio code not working for 6000 cd rds eon


Hello There.

There are many websites that offer an unlocking service for a few £/$ . here is one that I found.

http://www.radio-code.co.uk/ford-radio-codes.html

Hope this helps.

If my answer has helped you, please rate me on Fixya.

Many Thanks

ILikeBMW

Nov 17, 2008 | 2006 Ford Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4860 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...