Question about 1994 Ford F350 Crew Cab

2 Answers

I have a 1994 F-350 Crew Cab Dually. Fuse #13 keeps blowing out and the shift lever locks and won't allow me to put the truck in gear to move it. I was told that a swith on the brake pedal could be at fault? Dale

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

I would try looking at the wires to the trailer hitch under the rear of the box where the whip that runs to the front which has a plug on it,connects to where it branches off to go to each tail light,somewhere there is a short blowing the brake light fuse.When that happens you wouldnt be able to shift it unless you turn the key on until it unlocks the steering,then shift it to neutral,then start it then it would go into gear to drive it but you still wouldnt have brake lights.

Posted on Sep 07, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have a short in the brake wiring this fuse will blow, it cuts out the overdrive and the anti lock brake. that is why the unit locks up, you can put it in neutral and start it, the the steering wheel wont lock and you can drive it until you can change the fuse.

Posted on Dec 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

This morning it started fine but will not come out of gear and my airbag light is on. Someone said it was the fuse but I am not sure which fuse. Any ideas ?


I am mechanic I really need to no more make ect. but it could be battery or the ignition switch or ignition lock n key but like I said need more information this is a guess that I told you

Oct 21, 2015 | 2008 Chevrolet Chevrolet TrailBlazer LT

1 Answer

Fuse for brake lights keeps blowing out, shifter won't go into gear


Your vehicle has a safety system that won't let you take it out of park unless you have the brake pedal pressed ! Your brake switch could be shorted inside causing fuse to blow !
Shift Interlock System A brake/shifter interlock mechanism prevents shifting the transmission out of the PARK position unless the brake pedal (2455) is applied. The system consists of the following components:
  • an actuator activated by the key interlock assembly and brake pedal pressed input.
  • necessary wiring.
The system operates as follows:
  • The actuator is energized when the ignition switch is turned to RUN, locking the transmission range selector lever in the PARK position. When the brake pedal is applied and the stoplight switch (13480) is activated, the shift lock actuator is deactivated.
  • The transmission range selector lever can be moved out of the PARK position.
The ignition/shifter interlock cable (3F719) locks the transmission range selector lever in the PARK position when the ignition switch is in the LOCK position. It also requires the selector lever to be in the PARK position to turn the ignition switch to the LOCK position.

Sep 02, 2015 | 1998 Lincoln Mark VIII

1 Answer

How do you release a lock shift with blown fuse


Presuming you want to move a car with major electrical problems only for purposes of maintenance, look for a small panel near the gearshift with a slot in it. Most cars have a mechanical shift release under this small panel that will allow you to move the shift lever without the electrical interlock active. Check the owners manual for details.

Mar 19, 2015 | Cars & Trucks

1 Answer

On my 97 villager the shift lever won't move from the park position it's like its locked whats the problem


check your brake switch thier is two one for your brake lights and one to activate the shift lock soliniod.

Sep 09, 2012 | 1997 Mercury Villager

2 Answers

Okay, my boyfriend owns a 2000 ford f-250 super duty and your prolly wondering as to why im asking about this instead of him ... well im more mechanically inclined then he is lol funny huh... okay heres...


It sounds like the shift tube bushings are worn out. There are usually 2 u shaped clamps that have nylon bushings that hold the shift tube to the steering clumn. If loose, that throws off the shift position, could be btween 2 gears at once, and throws off the park - neutral safety switch. Fix that first.


snorkelbobby_53.gif Item Part Number Description 1 14A664 Air Bag Sliding Contact 2 3530 Upper Steering Column Shroud 3 3518 Steering Column Bearing Sleeve 4 3517 Steering Column Bearing 5 3511 Steering Column Lock Cylinder Housing 6 13K359 Multi-Function Switch 7 N808114 Pin 8 N805857 Steering Column Release Lever Pin 9 3D544 Steering Column Release Lever 10 3F609 Tilt Wheel Handle and Shank 11 7361 Column Shift Selector Lever Plunger 12 7210 Gearshift Lever 13 3D657 Steering Column Shaft 14 7B071 Transmission Control Selector Lever Plunger Spring 15 7G357 Gearshift Lever Pin 16 7212 Transmission Column Shift Selector Tube 17 N806582 Tilt Column Pivot Screw 18 7C464 Transmission Control Selector Lever Spring Clip 19 7E400 Gearshift Tube Bushing Clamp 20 - Spacer (Fixed Column) 21 3E729 Steering Shaft (Fixed Column) 22 3F527 Lever Assembly (Manual Transmission) 23 3F530 Pin (Manual Transmission) 24 3F752 Brake Shift Interlock Solenoid 25 7335 Gearshift Lever Socket Bushing 26 7A216 Transmission Shift Selector Position Insert 27 7302 Transmission Selector Lever Arm and Support 28 7E395 Shift Cable and Bracket 29 7210 Gearshift Lever 30 3E691 Steering Column Shift Lock Pawl 31 7W441 Gearshift Lever Pin 32 3676 Steering Column Instrument Panel Bracket 33 3D681 Steering Column Lower Bearing Retainer 34 3517 Steering Column Bearing Sleeve 35 3L539 Steering Column Bearing Tolerance Ring 36 3C674 Steering Column Lower Bearing Spring 37 3C131 Sensor Ring 38 3518 Steering Column Bearing 39 N806423-S56 Steering Column Retaining Nuts 40 14A163 Wiring Harness Retainer 41 3F723 Steering Actuator Housing 42 3B663 Steering Column Lock Lever Pin 43 11572 Ignition Switch 44 3D655 Steering Column Position Spring 45 3D653 Steering Column Locking Lever (LH) 46 3B768 Steering Column Position Lock Spring 47 3B662 Steering Column Locking Lever (RH) 48 3E715 Lower Steering Column Lock Actuator 49 3E696 Steering Column Lock Spring 50 3E691 Steering Column Shaft Lock Pawl 51 3E723 Upper Steering Column Lock Lever Actuator 52 3E695 Steering Column Lock Cam 53 3D656 Steering Column Tilt Flange Bumper 54 14A163 Wiring Harness Retainer 55 391727-S304 Shroud Screws 56 3530 Steering Column Shroud 57 3E717 Steering Column Lock Gear 58 3E700 Steering Column Lock Housing Bearing 59 3C610 Bearing Retainer 60 11582 Ignition Switch Lock Cylinder 61 3L539 Steering Column Tolerance Ring 62 3520 Steering Column Upper Bearing Spring 63 3C610 Snap Ring

Apr 05, 2011 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

KinlogworksI have A 2003 F-150 Super Crew. I have only used th4 wheel drive a few dozen times. about a mounth ago i switched it into 4 high and nothing happened. problem also in 4 low. any advise?


Operationally vacuum shifts the front axle between 2WD and 4WD mode. The GEM ( Generic Electronics Module ) applies ground to the solenoid needed for the mode selected on the switch ( for ESOF ) or when the transfer case shift lever is moved ( MSOF ). The contact plates in the transfer case signal the GEM that the transfer case is engaged, and the Vacuum solenoids need to be activated ( either 2WD to 4WD or 4WD to 2WD ).

Lift and support the front of the truck so the front wheels are off the ground ( take safety precautions, chock wheels, jack stands, etc )
Key on, engage 4x4 and try to turn the front drive shaft.
- If it turns it is a problem with the transfer case.
- If it doesn't it is a front axle engagement problem.

- If the front drive shaft does not turn :
•With the truck running ( with front wheel back on the ground ), switch from 2WD to 4WD and back again, the vacuum shift motor should move the lever on the front axle.
{ picture of shift motor }
-- If the vacuum shift motor does not move:
•Check for vacuum on the lines while shifting between modes. Pink vacuum line is 2WD mode, Light Blue vacuum line is 4WD.
•Check the fuses for the 4WD system and the solenoids.
•Check the vacuum lines from the vacuum shift motor to the solenoids on the firewall.
•Check the vacuum lines from the solenoids to the vacuum reservoir box behind the battery.
•Check the vacuum reservoir box for cracks.
•Typical solution is the vacuum lines ( to the solenoids or to the vacuum shift motor ) are cracked or the vacuum shift motor has a cracked diaphragm and has water in it.
•Could be the shift plate contacts in the transfer case are corroded / not making good contact, and not activating the solenoids.
{ Picture of Vacuum diagram )

- If the front drive shaft turns:
•For ESOF system
-- Check the fuses for the transfer case, engine compartment fuse panel, 17 & Cab fuse panel fuses 13 and 23 ( verify with owners manual, 97-97 & 99-03 MY can be slightly different on some items ).
-- Try hitting the transfer case with a dead blow hammer ( do not use a metal hammer, it can damage the transfer case ) to see if the transfer case shift motor is hung up .
-- Check the transfer case connector, to make sure the connector pins are clean and making good contact.
•For MSOF systems
-- Check that the shift linkage on the transfer case is moving when the lever is moved from 2W to 4H and 4L.

Jan 18, 2011 | 2003 Ford F150 Regular Cab

1 Answer

1991 ford f-350 dually crew cab running light's won't work


CK THE HEADLIGHT SWITCH CONN. THEY WHERE BAD ABOUT GETTING HOT & MELTING ON INSIDE WHERE WIRE TERNALS ARE IF SO YOU CAN GET AT A SALV YARD OR NEW IF NEW ONLY COMES WITH PLASTIC NO TERNALS [WIRES]

Sep 23, 2009 | 1990 Ford F150

2 Answers

1999 F350 crew cab 4x4 ford, gear shift lever


Ok ready to stand on your head under the dash?
It's doable... there is a flange connected to the gearshift lever under the steering column. If you remove the lower dash cover where the fuses are, you should be able to see it when you move the gear shift lever... look around on the floor of the truck to see if you dropped a star-headed bolt or two... these bolts worked loose on my superduty and made shifting very difficult..it was an easy fix... let me know how you do on it.

Dec 06, 2008 | 1999 Ford F350 Regular Cab

3 Answers

Shifting problem


press on brake? if so, stil non op, check connection, loose off, if ok FUSE, or bad switch, brake light work ok?

Oct 05, 2008 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
1994 Ford F350 Crew Cab Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...