Question about 2001 Chevrolet Blazer

2 Answers

Do i need a specail tool for door pins for a 2001 chev blazer

Need to know how to change door pins on a 2001chev blazer

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk for your info there are door pin removal drifts of variouse circumfrences these arethe best way to remove/drive out these pins either solid or cotter/split pins they are not expensive here in uk and you can buy a set of them or a single ? from most good motor supermarts and or try E BAY under garage tools+equipment there are also pin extractors but more expensive hope this helps

Posted on Sep 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

There is a special tool that they make, but it is not necessary. It does make the job easier though.


do i need a specail tool for door pins  for a 2001 - cacb96c.jpg

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 Chev Blazer. power lock problem. driver's door would not unlock doors, now it will not lock doors. passenger side works fine


you may just have a bad connection under the lock button under switch panel on your drivers door. check electrical plug in at door lock switch by removing that panel from driver door.it may be that you have to replace that door lock switch .thers only one fuse for door locks and if pass side works, it's not blown.

Aug 19, 2010 | 2001 Chevrolet Blazer

1 Answer

I have A 2001 chev blazer S10 how long does it take for the on board diagnostic computer system to re-set its self


It will have to be cleared manually. Go to Auto Zone and they will clear it for free. Just tell them you like to find out if the codes will come back and need to know if something else may be wrong.

Jul 03, 2010 | 2001 Chevrolet Blazer

1 Answer

Driver door needs to be align. Can I do it myself?


If the door wont line up correctly, is most likely due to bad hinge pins. Open door try to raise up on outside of door near bottom. If it has play hinge pins need to be replaced.

Jul 09, 2010 | 2001 Chevrolet Blazer

1 Answer

2001 Chev blazer, brakes have been bled, peddle


You probably have air between the master cylinder and the abs pump. Fill the reservior and have someone pump the brake and bleed the primary lines at the abs pump. Good luck.

Apr 19, 2010 | 2001 Chevrolet Blazer

2 Answers

How to replace door hinge pin and bushings without a spring compr


Harbor Freight has the tool for $3.99. I just bought one last Friday and replaced my hinge pins this weekend on my 2000 Chevy Blazer. You have to get that tool. Online they are $15.00. Make sure you support the door before you take out the old pins. I just lowered the window, took rope and tied it to the garage rafters and was all set. have fun!

Jul 14, 2009 | 2000 Chevrolet Blazer

1 Answer

Need how to and location to replace knock sensor


Im looking for the same part location on a 2002 chevy blazer. It might be under the distributer cap.

May 30, 2009 | 2001 Chevrolet Blazer

1 Answer

Power door locks lock on own


get a used remote module from the wrecker.get a haynes manual,they are 20 dollars or so and have all the info to find and replace the module.

May 26, 2009 | 2001 Chevrolet Blazer

3 Answers

I am changing spark plugs on my 4.3 vortec and need to know what the gap of the plugs are ?


I'd say probably .060 but see sticker on rad support or underside of hood to be sure.

Mar 01, 2009 | 2003 Chevrolet Blazer

1 Answer

Can't get transmission out 2001 chev blazer


did you take the short shaft loose? even if it were seized it would still come out.you may have to wiggle it back and forth a bit to work it loose but it should come out.

Jan 08, 2009 | 2001 Chevrolet Blazer

1 Answer

2001 Blazer door hinge pins and bushing replacement


you need a special spring compressing tool to remove and reinstall the hinge spring and then its a matter of removing the door installing the new bushing and rehang the door with new pins ive tried doing this while leaving the door on the car trust me its just harder that way good luck and please rate -jeff

Aug 26, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...