Question about 2004 Mercury Mountaineer

Open Question

My 2004 mountaineer when i press cd it says no cd, when i hit load or eject it says initializing and does nothing?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Mazda 3 w/ a single disc CD player...which has not been working for several months. There is a cd in the player but nothing happens when I press the eject button nor the CD button; won't...


Possible that the cd disc has jammed due to a change in the disc- warming can bend some cd's, also if the cd is struck inside as the loading mechanism is struck. In both cases the set must be pulled out if there is no hope with trying to retrieve the cd softly assisting while ejecting. If you do not hear any noise while the eject is pressed then the loading drive is faulty , you need to remove the cd , open to check, If this is mechanical then you can softly push the cd out, if not the electonic section needs a check.

May 03, 2011 | 2004 Mazda 3

1 Answer

6 disc cd changer jammed in 2004 mercury mountaineer, says error when i try to eject or play jammed discs.


personally I used another not so valuable CD to push the jammed CD back, it appears the ejected CD may bump the open exit gate and get stalled. It has happened several times. Good luck

Mar 15, 2011 | 2004 Mercury Mountaineer

1 Answer

I have an 04 explorer with a factory 6 cd changer. The radio works but the cd player does not. I changed the 2 fuses without success. I pressed 3 and 6 and it said " no cddj". When you press...


those stock radios dont last very long, same thing happened in my excursion on expedition. cheaper and eaiser to go to best buy and get a new one.

Nov 12, 2010 | 2004 Ford Explorer

1 Answer

CD player hs 2 cds jammed in it


best way is to remove cd player and unscrew cover and take out cd,s,i had to do this,the other way is to get pair of tweasers and try to grab hold of the cd through the slot but this also damages the cd

Feb 14, 2010 | 2009 Cadillac XLR-V

1 Answer

Cd is jammed in cd player, when i try to hit the eject button it tells me there is no cd. how do i get it out?


Turn the radio off and then disconnect the battery for 30 seconds. Make sure the radio is off or your going to be prompted to enter a radio code to activate it again. Once the battery is reconnected the radio can be turned on again and then try to eject the CD. Good luck and this should work. 

Jun 25, 2009 | 2004 Mercury Mountaineer

1 Answer

6 disc changer will not eject cds==


I had the same problem for months. I checked the owners manual, checked the fuse box, everything I could think of. Then, today, I did some online research and someone said one of the CD's is probably just jammed or slipped out a bit. The suggestion was to gently slide a credit card over the disk (through the door/slot, which in my case was partially open). I just tried it. The door closed and the message said "initializing". It worked! The CD player is back to normal.

May 24, 2009 | 2005 Mercury Mountaineer

1 Answer

6 disc changer will not eject cds==


One common solution is to disconnect the negative battery cable for 10minutes. When you reconnect, the stereo should reset itself and allow you to eject your CD's . Best of luck!
Greg

May 20, 2009 | 2003 Mercury Mountaineer

1 Answer

CD Player Problum


you can try pulling the fuses for the cd then replace them. as the cd is cycling on start up, hold the load and eject buttons, and then hit the unit, in hopes to release the jam.  

Dec 30, 2008 | 2004 Ford Escape

1 Answer

How do I operate the multi CD player on a 2004 Honda Accord LX?


there should be a load button some where on the head unit
what for it to indicate that it is OK to insert another **** then press load again
to change disk there should be a disk button
to eject the cd just choose what disk to eject eg cd 4 then press eject

Dec 27, 2008 | 2004 Honda Accord

1 Answer

Confused..?


press eject #1 put cd in and press load then hit eject #2 load then repeat for #3 #4 #5 and #6 enjoy

brent

Sep 28, 2008 | 2006 Mazda 3

Not finding what you are looking for?
2004 Mercury Mountaineer Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...