Question about 1992 Dodge Ram 250

Open Question

1992 dodge b250 only sarts and runs with fuel pedal fully pushed down

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

MY truck is fuel injected what would make it so i have to hold down gas pedal to finally get it to start then die

Sounds like you have some injector problems or the fuel pressure regulator. If the check engine light is not on, I would look for something allowing extra fuel into the engine.

Jun 28, 2013 | 1992 Dodge Dakota

1 Answer

1992 dodge dakota wont stay running

Have you checked base fuel pressure with a gauge ?
Code 42 is a problem with the fuel pump relay or ASD relay circuit.

Jun 22, 2013 | 1992 Dodge Dakota

1 Answer

Need to know how to set linkage on 1992 GMC Sonoma

With the car not running, get someone to push the pedal all the way down and check to see if the throttle valve is fully open.
If it is, chances are the engine is being starved of fuel (plugged fuel filter, plugged or undersized supply line, faulty pump, faulty regulator, etc.) - check the fuel pressure at the engine.
If it isn't, there is probably no cable adjustment and you will have to replace the linkage cable.

Jul 31, 2017 | 1992 GMC Sonoma

1 Answer


is it a gas engine or a diesel? it could mean two different things depending on the fuel type. black smoke in a diesel is either an air of a fuel problem. in a gas truck there should never be black smoke. it may be a dark blue smoke which is burning oil.

Aug 21, 2011 | 1992 Dodge Ram 250

1 Answer

I have 1992 dodge B250 van the speedometer is working but the miles counter not working.

if the speedometer is working but the counter is not - then the counter gear is broken.
it is not worth trying to fix -- just buy a new gauge and install it.


Feb 22, 2011 | 1988 Dodge B250

1 Answer

I need to no where my igniton control module is located at on my 1992 dodge b250 it has a 318

You have a hall effect pick up coil, it is in the distributor, under the rotor-it has a 4 wire harness that comes out of the cap and plugs into a harness-the pick up coil just lifts out, easy fix.

Jan 27, 2011 | 1988 Dodge B250

1 Answer

Cluth pedal feels the same only clutch wont disengage on a 92 dodge stealth

i had this problem for awhile and found out it was the clutch pedal assembly... push ur clutch pedal down a few times then reach down and pull up on it, give it a good tug! if it moves up half an inch or more, your clutch peddal ***. needs a rebuild. jus a few bushings, u can get em from sheptrans. they even have clutch pedal

Dec 20, 2010 | 1992 Dodge Stealth

1 Answer

I have a 1999 Dodge Ram 1500 3.9 V6 standard [hard to sart]

There is a safty switch on the clutch pedal arm that you need to adjust.

Dec 14, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Dodge 250 stalls whenever i stop or let off gas to turn

Check your fuel pressure, and EGR valve and sensor. Doesnt sound like a spark problem since it starts right back up. You can go to Kragen and check and get a fuel pressure test kit.

Apr 08, 2009 | 1987 Dodge Ram Wagon B250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides