Question about 1997 Mazda 626

1 Answer

Starter I am trying to remove the starter what is the best way, and is that my problem the car sounded like it was using almost all the battery juice barely turn over then it catches but the last time I shut it off would not turn over just a click of the keys turning over

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Take the battery to an auto parts store and have it tested first. IF the battery has a dead cell then the starter can't draw enough voltage to work. Next thing you'll have to ask is WHY is the battery dead/bad? Is it old? Did I drain it down by leaving something on like a interior light, or worst case senario, do you have a bad altenator thats not charging the electrical system and draining down the battery. So get the battery tested and if its good and charged fully and you're having the same problem then it may just be the starter.

Posted on Sep 07, 2009

Testimonial: "thanks for the help I will try that."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

PUT NEW STARTER IN BUT ENGINE WONT TURN OVER


1) Low battery, not enough juice.

2) Starter housing dirty, and engine block area where it connects to. Starter gets ground off of the engine block. (Negative connection) Positive connection from battery goes to solenoid. Clean starter, and engine area where it mounts.

3) Brushes for starter are completely worn down. The click you hear/heard, is one of the last it will make before the brushes are changed.

Test the starter off of the car with jumper cables, and a small jumper wire for the solenoid. Starter works you know it isn't the problem.

Post back in a Comment.

Regards,
joecoolvette

May 08, 2012 | 1988 GMC Jimmy

2 Answers

I have a 2000 dodge intrepid es. I have been having problems with it not starting the lights come on but when you go to turn it on everything goes dead. i have replaced the starter ignition wires, and the...


Check all electrical connection from battery pos to starter sol from battery neg to engine neg . sound as if you have battery terminal problems .

Jun 05, 2011 | 2000 Dodge Intrepid

4 Answers

Starter spins but will not engage


this could be a few problems that cause this,

1. your battery could be weak and not have enough juice to engage the starter solenoid

2. the bendix could be messed up

3. this is probaly the most common problem, the starter solenoid went out

the best course of action would be to have your battery load tested, and if its fine, replace the starter

Apr 03, 2011 | Daewoo Lanos Cars & Trucks

1 Answer

New battery, but car won't start


Try checking the starter for corosion if any is present, first disconnect the battery and remove all the corosion from the starter bolts and starter wires and then give it a try.

Dec 23, 2009 | 2003 Nissan Altima

3 Answers

2003 Alfa Romeo V6 2.5 wont start


When starting - is it turning slow ??
If so - the starter could be binding to tightly against the flywheel..
Put in a few starter shimms.. They will back the starter slightly away from the flywheel & should turn with more ease..

Jul 09, 2009 | 2000 Alfa Romeo 156

3 Answers

2001 Pontiac Grand Am wont start.


did you try jumping it with another car.

Jun 30, 2009 | 2001 Pontiac Grand Am SE

2 Answers

My 04 accord won't start and battery is fine. What should I check


It sounds like the battery has a bad cell. Take the battery and have it load tested. I have also had starters go bad without making any noise.

Apr 26, 2009 | 2004 Honda Accord

3 Answers

My sisters 1996 lincoln continental sometimes starts sometimes wo


Definitely sounds like a starter. When a bad starter is cold, it will start the car. After riding around for a while or after several starts in a row, the starter heats up and won't start without a boost. Since you've ruled out the battery and alternator, I'm positive a new starter will solve your problem. Good Luck!

Mar 29, 2009 | 1996 Lincoln Town Car

2 Answers

Car wont start, makes a clicking sound under the hood


try replacing the starter it may be bad, its not your clutch sensor if it was it would do nothing at all. try turning your motor over by hand the starter gear maybe stuck to the flex plate or push start the truck, shut it off and then try to start it if i does nothing but click replace the starter then

Feb 23, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1997 Mazda 626 Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...