Question about 2001 Ford Taurus

2 Answers

2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START

NO FIRE TO COIL PACK REPLACED THE COIL PACK--CRANK SHAFT SENSOR--CAM SHAFT SENSOR&SPARK PLUGS-- BATTERY IS OK --APROX.50 PSI FUEL PRESSURE --CHECCKED FUSES&RELAYES--MOTOR TURNES OVER BUT CAR WILL NOT FIRE

Posted by on

  • Anonymous Mar 13, 2014

    My Lincoln town car will crank but not start I've replaced cam sensor crank sensor and spark plugs Getting no fire Could it be cool packs

  • Anonymous Mar 21, 2014

    I replaced the crank and cam sensors spark plugs and coil packs Starter is fine My Lincoln town car STILL won't crank What could be wrong

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack

Posted on Jul 18, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 144 Answers

CHECK TIMING BELT TO SEE IF IT IS MOVING. YOU CAN DO THIS BY PULLING BACK UPPER PART OF TIMING COVER AND HAVE SOMEONE CRANK ENGINE OVER. CHECK THROUGH OIL FILL CAP TO SEE IF CAMS ARE TURNING. IM ASSUMING ALL FUSES HAVE BEEN CHECKED RELATED TO THIS.

Posted on Sep 07, 2009

  • 2 more comments 
  • thomas yarwood May 29, 2013

    its a timing chain drive and its ok plugs are getting feul ok but not sparking

  • WISDOM DOGBEY
    WISDOM DOGBEY Oct 28, 2013

    yes

  • WISDOM DOGBEY
    WISDOM DOGBEY Oct 28, 2013

    my car is not starting.what can i do to fix this problem?

  • WISDOM DOGBEY
    WISDOM DOGBEY Oct 28, 2013

    is a ford focus 2001,16 valves

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge stratus 2.4 dohc will the coil pack spark if the valves are bent on the number 2 and 3 cylinders


If the engine cranks, and the cam and crank are close to being in time, the coils should fire.
You just would not have compression on some cylinders.

Mar 25, 2015 | 2001 Dodge Stratus

5 Answers

2001 dodge stratus will the coil pack spark if the vavles are bent


if your valves are bent ,then i take it your timing belt has snapped .which means your camshaft can not turn ., so you can not get a spark at the plugs.if it was the old distributor you would have been able to check the coil with a spark plug tester the trouble is with a coil pack it is controlled by both sensors and your ECU but due to the camshaft not turning so your camshaft position sensor can not tell the ECU to fire the coil pack.

Mar 25, 2015 | 2001 Dodge Stratus

1 Answer

2004 ford focus no spark changed ht leads coil pack and crank sensor but still no spark


could be on the LOW tension side of the ign pack check any wiring leading to ign pack

Mar 26, 2014 | 2001 Ford Taurus

1 Answer

I have a 1996 Ford Taurus with a 98 DOHC 24 valve engine as a replacement for the original. The other day my friend borrowed it and drove to his house, got out, his wife got in. Put it in reverse backed...


Check in your trunk on left ( drivers side) see if emergancy shut down has been triped. it is a red button just push it in If this was helpful please leave good feed back

Aug 02, 2013 | 1997 Ford Taurus

1 Answer

2000 ford taurus crank sensor wiring diagram


follow this link and take your pick of many diagrams for the crank sensor.

http://images.search.yahoo.com/search/images?_adv_prop=image&fr=yfp-t-900&va=2000+ford+taurus+crank+sensor+wiring+diagram

Apr 05, 2013 | 2000 Ford Taurus

1 Answer

2002 sebring won't start


crank shaft position sensor

Sep 23, 2012 | 2003 Lexus LS 430

1 Answer

My 2003 ford tauruse will not start. I do not


the pin locations are 21 & 22 on the plug.
I am working on a 02 Sable with the same problem,
let me know what you find out on this as I will be doing the same this weekend.

KK
mrkk6724@yahoo.com

Feb 07, 2010 | 2003 Ford Taurus

2 Answers

1995 ford explorer doesn't start, crank & cam sensors replaced


Does you fuel pump delivers fuel. Is it there a spark.

Dec 29, 2009 | 1995 Ford Explorer

2 Answers

2001 ford taurus wont start


It could be bad plugs, plug wires, a bad ground will do this as well. Check to see if it has the three main things.

Spark
Air
Fuel

Anther common problem is the crank shaft speed sensor. It will cause it to not spark and not start.

Joe

May 19, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2001 Ford Taurus Logo

1,185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...