Question about 2006 Dodge Ram 3500 Truck

1 Answer

Headlight low beams don't work - 2006 Dodge Ram 3500 Truck

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 523 Answers

If the high-beams work the ground is OK. I'd check the headlights first; while doubtfull but possible both bulbs may have failed. My gut says that the relay has failed. This being the case it should be an easy fix to replace
Hope this may have helped.
Tom

Posted on Sep 07, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: low beam headlights do not work, but high beam headlights do

They do now have more than one beam.

Posted on Jul 19, 2008

djicenova
  • 319 Answers

SOURCE: low beam headlights not working

check voltage at switch

Posted on Mar 18, 2009

  • 2 Answers

SOURCE: headlights wont burn on low beam

I had a similar problem. I found the switch under the steering wheel cowling was broke. I actually glued and repaired it and have had no further problems.

It has been a long time since I did it but I remember it was fairly easy to remove the cowling and inspect the switch. Good luck, ml

Posted on Apr 25, 2009

  • 1986 Answers

SOURCE: Both low beam headlights stopped working at the

Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

Posted on Aug 12, 2009

  • 1 Answer

SOURCE: 2002 Acura TL low beam headlight

How to Shift my headlight beam from position.
from I replace my headlight it's spatting directly on the ground..What can i do to change it from position

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side low beam headlight went out, replaced the bulb but only works on high beam, any suggestions


using a test light check for powers and ground at the headlight socket. you say the high beam works so that pretty much says the ground is good. if the low beam terminal has no power you will have to see if your car has a fuse for each headlight, as you don`t say the year make and model you have. if you have power then check the socket for corrosion or a loose connection.

Apr 19, 2015 | Cars & Trucks

1 Answer

Low beam headlight drivers side don`t work. high beam it works.


Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.

Oct 05, 2012 | 1996 Ford Explorer

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Headlights If on low beams for a while, then switch to high beam, when i go back to low beams- NO headlights of any kind. Complete darkness. High beams will come on but low beams will not come on. If i...


on that year i did not find one either when i rsearched it . so i"am going to say that headlight switch and relay all in one . . but if you have a enigine type fuse box check it anyway or goto headlight swtich and follow the wiring down a bit and see if there is anything connected to it .

Oct 08, 2011 | 1994 GMC Sierra

1 Answer

Only the drivers side headlight works in high beam on my 96 honda oddessey.both the headlights don't work in low beam.what seems to be the problem??


Hello! Replace the Low Beam Cut Relay; It is causing the fault...It is located above the gas pedal...See picture below...Guru...Saailer...


10_6_2011_10_33_43_pm.jpgORIGINAL ENGINE MANAGEMENT Part # DR1067 Cost $10

Oct 06, 2011 | Cars & Trucks

1 Answer

My headlights went out dont know what the problem is low beam dont work high beams works


it may be the dimmer switch located on the base of the steering colume that is not working on the low beam side.also the headlights themselves may need changing if the low beam filament is burnt out and you didn`t realize one was burnt out then the other one burnt out.if that`s not the case then it could be a bad connection at the plug connector for the low beam or for some reason power is lost between the switch and the headlight.you don`t say if this has day time running lights,if it does then it could be the drl relay that is bad.

Apr 21, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...