Question about 1999 Chevrolet Astro

1 Answer

Location of fuel filter for 1999 chevy astro van

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Follow the lines from the gas tank down the frame body until you find it usually round and connects between the line

Posted on Sep 07, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 135 Answers

SOURCE: need to change in my 1999 chevy venture van fuel

look under it on the frame rails, the filter it held to the frame about middle of van ,just follow the fuel lines from tank ,easy to change , ,hope this helps you, thanks robert b.

Posted on Jul 08, 2009

  • 158 Answers

SOURCE: Where is the fuel pump located

In the tank

Posted on Apr 15, 2009

  • 87 Answers

SOURCE: 1999 chevy astro fuel pump reset switch

No such switch .

Posted on Dec 19, 2008

wadembly
  • 448 Answers

SOURCE: where is the fuel pressure regulater on a 1998 chevy astro van ?

it is on the fuel rail on the engine its next to the fuel line conection from tank to fuel rail for injectors

Posted on Nov 13, 2009

  • 65 Answers

SOURCE: how toreplace fuel injector chevy astro 1999

Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the fuel system pressure. Refer to the fuel system relief procedure in this section.
  3. Remove engine cover.
  4. Disconnect negative battery cable.
  5. Remove upper manifold assembly.
  6. Disconnect fuel meter body electrical connection and the fuel feed and return hoses from the engine fuel pipes.
  7. Remove poppet nozzle out of the casting socket by squeezing the nozzle locking tabs together.
  8. Remove fuel meter body by releasing the locktabs.
    NOTE Each injector is calibrated. When replacing the fuel injectors, be sure to replace it with the correct injector.
  9. Remove lower hold-down plate and nuts.
  10. While pulling the poppet nozzle tube downward, push with a small prytool down between the injector terminals and remove the injectors.

    0996b43f8022cb96.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the fuel meter assembly, including the injectors

To install:
  1. Lubricate the new injector O-ring seats with engine oil.
  2. Install o-rings on the injector.
  3. Install fuel injector into the fuel meter body injector socket.
  4. Install lower hold-down plate and nuts. Torque the nuts to 27 inch lbs. (3 Nm).
  5. Install fuel meter body assembly into the intake manifold. Torque the fuel meter bracket retainer bolts to 88 inch. lbs. (10 Nm).
    CAUTION To reduce the risk of fire or injury ensure that the poppet nozzles are properly seated and locked in their casting sockets.
  6. Install fuel meter body into the bracket and lock all the tabs in place.
  7. Install poppet nozzles into the casting sockets.
  8. Engage electrical connections.
  9. Install new o-ring seals on the fuel return and feed hoses.
  10. Connect fuel feed and return hoses and tighten the fuel pipe nuts to 22 ft. lbs. (30 Nm).
  11. Connect negative battery cable.
  12. Turn the ignition ON for 2 seconds and then turn it OFF for 10 seconds. Again turn the ignition ON and check for leaks.
  13. Install the engine cover.

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start when its damp out. when not damp starts right away thank u mike


Astro won't start or very hard to start when damp or rain ...

www.topix.com > Chevrolet Astro
Aug 24, 2007 - Posted in the Chevrolet Astro Forum. Leave a ... 2000 astro, Hardstarting or wont start when wet, once started its fine. I replaced the cap, rotor, gas filter, next rain was hard to start but did after about 10 tries. ... I have a 2000 astrocargo van. 4.3 v6. ... look for a faulty coil. mine passed out in a rainy day.

Van won't start in wet weather - Chevrolet Forum - Chevy ...

chevroletforum.com > ... > Past Chevy Truck, SUV & Vans > Astro
Sep 22, 2007 - I have a 1999 Astro Van and nearly everytime it rains or sometimes when I wash it, it will not start. ... I really like my ASTRO for everything from carrying family, boat, trailer, etc. but if it is not resolved its going before someone gets hurt. ...When it was damp out, the coil case would become wet, and the ...

Jan 18, 2016 | 1987 Chevrolet Astro Cargo

2 Answers

Where is the fuel filter on a 200 chevy astro van


should be around tank. Thank you for asking and I hope this helps you.Please leave me a 4 thumbs up.

Jul 20, 2010 | 2000 Chevrolet Astro

1 Answer

Whe ere is the fuel filter located on 2001 chevy astro van and how do ou change it c cxdee3


it is located under body on frame rail almost directly under drivers seat a 16mm and a 20mm wrench and a screwdriver for the retaining clamp

Jan 01, 2010 | 2001 Chevrolet Astro

1 Answer

1999 chevy astro van studdered stalled and now will not start


I have had that exact issue on my 99 astro,but before it left me stranded on the side of the Highway it was running a little rougher than usual,but once accelerated it was fine,until it finally Stalled. So i Replaced the fuel filter and The Cap and Rotor and now it is Fine,started Right Up.

Jun 16, 2009 | Chevrolet Astro Cars & Trucks

1 Answer

1996 astro van stopped running


Sounds like dirty gas and the fuel filter is clogged...try changing the fuel filter...some are under the car, but most are mounted against the firewall in the engine compartment.

Apr 19, 2009 | 2005 Chevrolet Astro

1 Answer

Chevy astro van turns over but wont start when


Check to see if the fuel pump is kicking in,
when you turn the key on without starting the van you should hear it kick on for about 2 seconds,

It could be...
A clogged fuel filter...
Blown fuse for the pump..or bad pump relay..
No gas
Bad fuel pump

Mar 07, 2009 | 2000 Chevrolet Astro

1 Answer

2001 Chevy Astro Van


Needs Crank sensor. Good luck

Dec 28, 2008 | 1999 Chevrolet K1500

2 Answers

1987 chevy astro van


could be a clogged fuel filter. How long since you changed it?
It is located bolted to the frame on the drivers side. They only cost $7.00 so I would try this.


















Jul 24, 2008 | 1996 Chevrolet Astro

1 Answer

2001 Chevy Astro Van


buy a Honda or Toyota, they work

Jun 05, 2008 | 2001 Chevrolet Astro

Not finding what you are looking for?
1999 Chevrolet Astro Logo

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...