Question about BMW Z3

1 Answer

Passanger door will not open by remote key phob or with key. have checked all fuses ok cannot hear or feal locking assy. working. Alan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 601 Answers

Hi,
Is this the condition that the door not opened from both inside and outside? If thats the case the cable that attaches to the outer part of the door handle is too tight putting pressure on the latch. So i think its the mess with the outer handle may be pushing in to try and relieve pressure and then pull the inner handle.
If the door not opened from inside take the door pannel off would be easiest way to find out .So i think the rod that opened the latch was bent and it would not pop the latch open from the outside.
Thanks
Smith.

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The front doors do not work with the remote, only the back doors. The front doors have to be unlocked individually from the inside.


first check for child safety locks on the inside of the doors -- then read manual to ensure you don't have to click unlock multiple times - if all else fails, may have to have PHOB key reprogrammed

Jun 22, 2010 | 1994 Buick LeSabre

1 Answer

How do i set the alarm on my jeep commander useing the key phob


just push the lock button - then try to unlock without using the phob and opent the door to see if it works -- if not, your phob will have to be reprogrammed.

May 02, 2010 | 2006 Jeep Commander

2 Answers

Passenger door wont unlock, key turns in the lock but door wont unlock. Electric locks dont work. Driver door works fine 1991 Nissan pathfinder XE 4door


2006 Nissan Pathfinder rear passanger doors don't open unless opened from insinde handle first. Then will open all the time until central locking is used then same problem occurs

Apr 03, 2010 | 2001 Nissan Pathfinder

1 Answer

Power sliding door handle does not work. Can open


check on the door wih the door open if there is a child safety lock. this is ussualy on the part of the door that engages the lock on the van and sould be clearly marked

Jan 16, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Remote works but doors don't lock/unlock


Check the remote battery or replace. Check all fuses. If you need to reprogram, try this.

key not in ignition.
driver door open-others closed
driver door unlocked

1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice
this is rewrite mode,have all remotes to reprogram
it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possesion,you are done.

to end mode open door or insert key into ig.you can do up to 4 remotes.read this a couple of times to get the sequence down.there are time restraints,but if you go in order it will work.do not wait more than a second b/t each step and you will be ok.i know from experience that you can do this as fast as you can and it will enter mode.if steps out of order or you wait to long it wont.print this and have in lap,read ahead of what you are doing.good luck

Jun 13, 2009 | 2000 Toyota Land Cruiser

1 Answer

Door Lock Problem- Civic-04


you have a bad lock actuator the locking & unlocking is built into the actuator

Nov 28, 2008 | 2003 Honda Civic

2 Answers

Remote locking problem


Take your car and zapper to a Mercedes dealer to re-synchronize the encryption codes between them.

Jun 09, 2008 | 2002 Mercedes-Benz E-Class

1 Answer

Central locking system


I have recently had this problem I believe this to has been caused by a fault in the drivers door lock assembly It seems this contains the remote receiver. In my case I think there had been some radio interference being the main cause. The remote system seems to be working OK, The door lock will still not operate with the key.
Remove and replace the fuse 25 resetting the ignition module. Starting the engine, switch off remove the key from the ignition, stay in the car lock the doors using the door button, press and hold the remote unlock button for approx 5 seconds, listen to see if you can hear the clicking of the door receiver when you press the remote buttons. Press and hold lock/unlock button. You may be lucky.

Jun 05, 2008 | 1999 Volvo S80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...