Question about 2006 BMW 5 Series

Open Question

My remote do not stay slot and also saying remote will not tunroff engine

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xj8 trunk won't open


the normal prob is caused by the wiring around rh trunk hinge broken removing supply to release motor. you have a manual key slot in rh of trunk lid think its in either of the trunk badges or the plinth this siezes up because everyone uses the remote or dash switch but when the wiring fails you cant use the key slot try spraying plenty of relase fluid in the slot say wd40 and gently keep trying to free it off that has allways worked for me when you get in remove the plastic rh trunk hinge cover and repair fractured wiring good luck

Jan 31, 2017 | Jaguar XJ8 Cars & Trucks

2 Answers

How can I program my remote?


Remote for ? door unlock / lock , remote start , garage door opener .
If the door lock / unlock , panic alarm ,remote start . You can't dealer only . Need a factory scan tool .
Transmitter Programming
Important: Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle. The order in which the transmitters are programmed is important. The first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. Use care to program the transmitters correctly.
The scan tool must stay connected until all of the transmitters are programmed.

Invalidate All
This procedure will erase all keyless entry transmitters from memory.
Install a scan tool.
Turn ON the ignition with the engine OFF.
With the scan tool, select Body.
Select Remote Control Door Lock Receiver (RCDLR).
Select Module Setup.
Select Program Key Fobs.
Select Invalidate All Fobs.
Follow the scan tool on screen instructions.
Transmitter Slot Programming
Transmitter slot programming allows a single transmitter to be programmed into a specific slot without affecting any of the other programmed transmitters. By using slot programming, the transmitter originally programmed to a specific slot is erased and the new transmitter learned in its placed.
Install a scan tool.
Turn ON the ignition with the engine OFF.
With the scan tool, select Body.
Select Remote Control Door Lock Receiver (RCDLR).
Select Module Setup.
Select Program Key Fobs.
Select the key fob desired to be programmed.
Follow the scan tool on screen instructions.
Remove the scan tool.
Exit the vehicle. Operate all functions on transmitters to verify correct system operation.

Jun 05, 2015 | 2007 Buick LaCrosse CXL Sedan

1 Answer

Factory Remote Starter works sometimes


Could be an engine or data problem.. If the check engine light ever came on, the computer is locking out the remote start. This is to prevent the car from running unattended that may have a problem. Have the compute scanned first or any codes, correct the problem and the remote start problem may go away.

Jul 20, 2017 | 2005 Chevrolet Malibu

1 Answer

My remote start on my 2005 Grand Prix will start the engine but shuts off right away.


is there any check engine light on??
well about GMC and chevrolet i can say that if there is any problem with the engine/the engine light is ON then the vehicle wont start, just an idea that may be there is the same reason with your car.

Dec 06, 2013 | 2005 Pontiac Grand Prix

1 Answer

I have a 1996 acura rl and my problem is my remote entry won't work and my cluster light won't shut off and the check engine light came on all at once don't have a clue as to why


remote entry wont work because either remote battery is dead or remote broken.cluster light will stay on if head light stay on could have faulty headlight relay or headlight control unit faulty let dealership check it out.

Sep 09, 2012 | Cars & Trucks

1 Answer

On my bmw2006 330i it seems that the ignition is not really off after stopping the car. After stopping the engine with the start/stop button and removing the remote key from the slot, the button remains...


In your car the engine starts this way: a code stored in the remote key is sent wirelessly to the receiver in the receptacle (thru its coil antenna) which sends it to the ECM to activate it; then the starter button sends the command for the actual starting.
In your case the receiver appears to keep the code in memory when it shouldn't. Have it replaced. BTW this has absolutely nothing to do with the ignition coil.

Sep 12, 2011 | 2006 BMW 3 Series

1 Answer

Lights stay on after locking car with key remote


MAKE SURE THE INDICATOR STOCK IS IN THE OFF POSITION WHEN YOU LEAVE THE VEHICLE AS THIS KEEPS THE PARKING LIGHTS ON IN THAT DIRECTION.GOOD LUCK.

Jun 04, 2009 | 2002 Volkswagen Passat

1 Answer

Wher is my thermostat located on my 1999 chevrolet malibu


On Driver's Side Of Engine. Behind Exhaust Pipe That Runs Acrost Back Side Of Engine/Transmission. Be Careful To Not Attempt While Engine Hot Or Warm. Two 13mm Bolts Hold It on. Both Bolts To Have To Come All The Way Out, Even Though One Is Slotted. Be Sure The Thermostat Stays In Housing When Going Back Together. Good Luck

May 02, 2009 | 1999 Chevrolet Malibu

Not finding what you are looking for?
2006 BMW 5 Series Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...