Question about Mazda 323

Open Question

On the Mazda 323 97 model 1300 Is the oilpump situated in the sump or somethere else?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the holden vectra drain plug situated

Im assuming you mean the engine sump drain plug to drain the engine oil.
Its located on the bottom of the sump depending on which year model yours is otherwise look at the back emgine of the sump.
Its a torqs fitting plug looks like a star in the centre .to undo it you will need a t45 torqs bit..

Feb 13, 2015 | Holden Cars & Trucks

1 Answer

How to remove a mazda 626 samp

Do you mean the sump. If so remove the engine.

Apr 17, 2014 | Mazda 626 Cars & Trucks

1 Answer

How to change transmission fluid in mazda astina model 1998.

might not have a filter just a gauze filter on the pick up pipe inside the box ,providing it has a dip stick then slacken sump and drain then remove the sump and check the gauze filter ,if no dipstick then refill acording to makers spec on the quanty

May 11, 2012 | Cars & Trucks

1 Answer

1998 mazda bravo ute b2600 petrol- Cannot locate the oil filter to change. Can find the sump and bung. Is it possible this model has no oil filter?

No!!!! The motor has oil filter.Look from the top of the motor.It is right there.Under the manifold.Hope this helps

May 25, 2011 | 1998 Mazda B-Series

2 Answers

Mazda 6 2o diesel replaced turbo new unit same

There is a oil drain return from the turbo charger to the sump. If the sump oil level covers the outlet into the sump, oil will build excess pressure tin the turbo causing the sealing rings to leak oil in to the intake manifold. This would cause smokey exhaust and loss of oil. Try this. Drain the sump completely, refill with the exact quantity of oil to Mazda spec. Dip the oil and if the new oil level is lower than the full mark on the dipstick, you have found the cause of the problem. Mark this new level with a scriber or file and fill only to this new level. Hope this is the solution.

Jan 28, 2010 | 2004 Mazda 6

2 Answers

Need to replace oilpump is it hard/?????

well it involves dropping the sump and i dont recomand a novice do it

Jul 13, 2009 | 1991 Dodge Ram 350

1 Answer

Locating oil filter and sump plug for 323 mazda

dont worry about pulling the wrong plug but just look for the oil pan and there is your little plug that needs to come out!

Apr 17, 2009 | Mazda 323 Cars & Trucks

1 Answer

Small oil weep from around the sump seal.and also from around the oil filter seal,this car has only done 1205kms.

If it is just a weep don't worry about it. No factory issues that I can find, try a Mazda only forum.

Oct 31, 2008 | 2007 Mazda 3

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides