Question about 2006 Ford Fusion

1 Answer

The car seems like it is not getting gas to the engine...will go about 55-60 by flooring the gas pedal. It jumps/shakes. Help!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Expert
  • 205 Answers

Check the turbo and Turbo intake hose. I've got the same problem and it comes up with a broken turbo pipe leaking the pressure necessary to provide power. Possible is too the blocked air filter and/or fuel filter.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

What causes shaking while accelerating


Mrs Amanda when you said on pushing the gas pedal is shaking do you mean the whilst accelerating with engine running ( reving) you do receive a shake? or when pushing the pedal you do feel on the pedal with engine off a shake? If it is the first check for any spark plug or spark plug HT Lead not working and cause the engine to shake. If is the second cause then check for your pedal connection cable etc.

Apr 26, 2014 | 1999 Toyota Camry

1 Answer

Engine shakes when idling and poor acceleration


please I need help..my car is shaking and vibrating when am moving or stoping at redlight..and I cant step on the gas pedal it will start vibrating..so I quickly remove my feet from the gas pedal ...

Oct 27, 2012 | 2002 Jaguar S-Type

2 Answers

Motor starving for fuel pump ok pressure 100lbs book calls for 44lbs which do I replace the fuel pump relay or pressure regulator engine will not Idle with pedal too floor only 2000rpm


sounds like the regulator is not doing it's job, but you say starving? Is the engine running lean or rich? Is there black smoke coming out the exhaust? I'm thinking high pressure would normally cause a rich condition.

Sep 08, 2010 | Volvo 240 Cars & Trucks

1 Answer

The car has full electric powers but it wont turn over. what's the problem


Just because the lights go on and the radio plays does not mean you have full power.
Many things can keep a car from starting, and the cold makes them worse.
Did you try jump starting?
And most importantly did you crank the engine for maore than a minute at a time? That means you have flooded the engine with gas.
To fix this, jump the car while holding the gas pedal to the floor. Do this 4 times at 20-30 seconds each.
Then try and start without holding gas pedal.

Jan 04, 2010 | 1998 Kia Sephia

1 Answer

My 1990 Buick Lesabre shakes at 40 mph what do I do?


Check front engine mounts. Open hood, hold brake pedal down, put car in drive, press gas pedal down a little and see if engine jumps up due to a broken mount.

Jul 10, 2009 | 1990 Buick LeSabre

1 Answer

Acceleration/Throttle problems


mcdevito75 here, Have your repair shop run a computer scan on the engine, also check for vacunm leakes at hoses and intake manifold, Have the fuel injectors checked for sticking or not working at all.

Apr 24, 2009 | 1997 Buick Skylark

1 Answer

The gas pedal went to the floor and stayed there.


sounds to me like your accelerater cable broke. can be bought at napa or most reputable parts stores

Mar 13, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2007 Dodge Caliber


Make sure you have a fully charged battery. When starting the car, push the gas pedal down to the floor to engage the choke. Then push pedal halfway down and turn the ignition. Try jump starting to see if it is the battery. If it still turns slow it may be a bad starter.

Jan 22, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

4 Answers

Car shakes when trying to start and doesn't turn over


  1. hold gas pedal to floor while trying to start. do not pump pedal.
  2. holding pedal to floor is how you start a flooded f.i. engine

Nov 12, 2008 | 2000 Lincoln LS

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...