Question about 1989 GMC C3500

1 Answer

Where can I find a diagram showing me how to reinstall plug wires from cap to plugs on a 1989 GMC 3500 w/a 5.7 Ltr. engine. I did not remove them so they aren't diagrammed.

Posted by on

  • chasetnc Sep 08, 2009

    Thanks, bunches!!! Excellent explanation, and in a very timely manner!

    Thanks again,

    Chase

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Number one should be at the 5 o'clock position. Then the plugs should go 1-8-4-3-6-5-7-2 around the cap in a clockwise direction.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Sierra removal of ignition module


The ignition module is under the distributor cap. Mark the spark plug wires location then remove the cap. Remove the 2 screws and connectors.

May 08, 2014 | 1999 GMC Sierra 3500

1 Answer

On a 5.7 ltr I replaced plugs and plug wires and dist cap and rotor. thought I was paying clos attention to plug wire position and yet obviously crossed two of them. when attempting to correct, then e


the firing order is 1-8-4-3-6-5-7-2 trace from the distributor cap and see where you went wrong go clockwise. # 1 cylinder is on front drivers side. #2 is on the front passenger side #3 is on drivers side behind #1 #4 is on passenger side behind #2 and so on. Good luck.

Jun 20, 2012 | GMC Cars & Trucks

1 Answer

Need diagram of distributer and how to put the spark plug wires on the right way on a 1998 GMC Jimmy


On this year and model the caps are labeled, it shows were the wires go, i will give you a diagram to help you. i made a picture of the engine as you would see it from standing in the front, i labeled the cap and the cylinders for you , hope this helps. good day.johnjohn2_139.jpg

Sep 21, 2011 | 1998 GMC Jimmy

1 Answer

Spark plug wiring on distributer cap on firing order


here is the diagram for your engine...
click here


Follow the locations on the cap illustration..

Jun 09, 2009 | 1991 GMC Safari

1 Answer

Firing order


If you pulled all the wires at once, you will need to go to a parts store and see if they can show you a diagram on how to reset the wires. Do not unhook the wires from the spark plugs at this point.

Feb 14, 2009 | 1987 GMC VanDura

2 Answers

1987 GMC Jimmy Distributor cap and Rotor replacement


A diagram may not be needed as its a reasonably easy fix to do on your own.the distributor ca p will only fit on properly one way because at the base of the cap locaters can only fit the distributor if they line up.When doing the spark plug leads do them one at a time and if nessecary write or mark leads as 1,2 etc .The rotor can only fit on one way but put a mark on the distributor to show where the rotor was pointing when you took it off and if it still points there when the new one is fitted.When changing distributor cap and leads they have to go to the correct place.Pays to mark the outside of distributor cap where the locating bits are On the new and old one.Fit the new cap and rotor then take a spark plug lead and fit to new cap 1 at a time.You can tell by lining up the marks on the outside of the distributor cap when you hold them one on top of the other.Good luck

Oct 20, 2008 | 1987 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...