Question about 1994 Chevrolet S-10 Blazer

1 Answer

94 Blazer How do I replace brake lines

Posted by on

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 103 Answers

We've done this before and about the only special tool you'll need is a double flaring tool. As for the parts, GM no longer makes the brake line assemblies so you'll have to make them. We use the brake lines NAPA offers alone with the unions. The brake lines are 3/16" so you'll be able to make the bends with you hands in the event you don't have a bender. Here is a list of the tools you'll need.

94 Blazer - 0d23962.jpg

Posted on Sep 07, 2009

  • longbow243
    longbow243 Sep 07, 2009

    Front or rear???

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace front brake hoses on 94 ford ranger


Here is a good forum to find your answer.
http://www.fordrangerforum.com/exterior-tech/88010-brake-line-hose-replacement-94-xlt-2-dr.html

A few few things to remember: Purchase fresh new brake fluid and have a clean MityVac pump (both can be purchased through AutoZone, NAPA, Orielys, etc..) , plenty of clean rags, brake line clamps to stop the fluid from leaking when you initially pull the line off.
Be prepared to bleed ALL the brakes after changing the lines. When bleeding the brakes (after replacing the old lines) work from the caliper that is the longest distance from the brake master cylinder first to the shortest distance line.

Nov 22, 2014 | 1994 Ford Ranger Supercab

1 Answer

I need free vacuum line diagrams for a 94 s10 blazer 4x4


https://www.google.co.uk/search?q=vacuum+line+diagrams+for+a+94+s10+blazer&es_sm=119&tbm=isch&tbo=u&source=univ&sa=X&ei=RoJmVMLgN8fzasiagcgP&ved=0CCIQsAQ&biw=1920&bih=985#tbm=isch&q=vacuum+line+diagrams+for+a+94+s10+blazer+4x4&imgdii=_

Aug 29, 2014 | 1994 Chevrolet S-10 Blazer

1 Answer

94 s 10 jimmy 4wd vortec brakes stiffen up sometimes unexpectedly and the pedal refuses to go down... any advice?


when brakes get stiff can you push down with both legs to get brakes to work? 3 things check vacuum line to brake booster. Brake booster may be about to fail. Replace brake booster and master cylinder.

Mar 15, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

Hole in the break line


IF YOU DONT WHANT TO BUY THE TOOLS AT THE AUTO PART STORE THERE PREMADE LINE AND UNION THAT FIT LINE LINE TOGETHER ITS EASY TO INSTALL BEND THE LINE TO PROPER SHAPE YOU HAVE TO REMOVE THE OLD FITING INSTALL NEW LINE AND BLEED THE BRAKE LINE FRONT TO BACK ABOUT THE LENT OF THE TRUCK THEY SELL THOSE LINE IN DEFERENT LENT PREMEASURE UNDER THE TRUCK THATS THE BEST WAY TAKE OUR TIME ITS GONNA BE OK PIERRE

Jan 10, 2009 | 1994 Chevrolet S-10 Blazer

3 Answers

Turn signal relay switch, 94 s10 chevy blazer


The Turn signal relay on a 94 s10 blazer is located under the cluster area right behind the panel that holds the parking brake release handle you will see it once a couple of trim panels get remove it will be to the right side of the brake release handle

Nov 18, 2008 | 1994 Chevrolet S-10 Blazer

2 Answers

Brake line for 94 Chevy S-10 pickup


thats a common placc for them to rust out you will need 10 feet of 1/4 in. brake line that will go front to back

Oct 20, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

Turn signal cuts out when brake is applied


To cover all of the bases, replace your bulbs, fuses and flasher.

Jul 24, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...