Question about 2006 Fiat 124

1 Answer

Check oil level in manual transmission - 2006 Fiat 124

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

If it does not have a dip stick just remove the upper plug that you use to add lube. If you see lube or can feel it with your finger it is full.

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you check the transmission level on a 1995 Polaris 425 Magnum. How do you add fluid?


on any vehicle with an automatic transmission, there are two dip sticks. One to measure oil level, and the other transmission fluid level( typically labled 'check with engine running in park'). To add transmission fluid requires a funnel to introduce fluid via the dip-stick tube.

If you have a manual transmission, then you don't need transmission fluid, you need gear oil, which can be measured at the transmission and added at the same port.

Mar 06, 2015 | Cars & Trucks

Tip

How to change (check) AUDI transmission oil


Transmision oil for Audi A4 (1.8, 1.8T, 1.9 TDI):
Manual gearbox (5 speed):
- Capacity = 2,25 liters
- Specification: Gear oil SAE 75 W 90 (synthetic oil)
Part number G 052 145 S2 (1 liter)
- To check oil level, unscrew oil filler plug placed on the left side of the gearbox in front and near of transmission axle, using an Allen 17 mm key.
- Check oil level with locally manufactured tool, e.g. a piece of angled wire.
- Specification: oil level 7 mm below bottom edge of oil filler hole.
- Install oil filler plug, tightening torque = 25 Nm.

on Dec 19, 2009 | Audi A4 Cars & Trucks

1 Answer

Transmission


There are two types of transmissions in 1991 Toyota Corolla. Manual Transmission and Automatic Transmission.
1. Manual Transmission:
The transmission oil is checked through a level bolt which is provided to the left CV joint side in the middle of transmission. To check the oil level, park the car on a level floor, remove the level bolt with 22 mm or 24 mm spanner. If the oil starts coming out of this hole the oil level is considered OK. If not, top up the oil till it starts coming out and tighten the bolt. The recommended manual transmission oil grade is 75W/ 90W and total capacity is 2.4 Litres.

2. Automatic Transmission:
Warm up the engine, park the car on level floor, pull up the hand brake, gear lever stick in P, keep the engine start, let the radiator fan come on, take the auto-transmission stick out, wipe it with a clean dust free cloth, insert it in, again take it out, keep the stick in horizontal position and check the oil level. At operating temperature the auto-transmission oil level should be at upper level (Hot). If not, add oil to mach the mark. The recommended auto-transmission oil is Automatic Transmission Fluid (ATF) Dexron II, and total (drain and refill) capacity is 1.4 Litres.

Oct 09, 2013 | 1991 Toyota Corolla

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

2 Answers

How to check transmission fluid level


Most 1995-on VW models don't have a transmission fluid dipstick for checking the transmission fluid level. To fill and check the level of the VW automatic transmission fluid you have to remove a plug on the side or bottom (location depends on model and if you have an automatic vs. manual transmission) of the transmission drain pan. The factory manual refers the expensive VAG 1924 special tool for pumping the VW automatic transmission fluid into the oil pan.

Mar 02, 2011 | 2002 Volkswagen Jetta TDI

2 Answers

Just looking to add more transmissioin fluid.. not sure where


Underhood Check-check for transmission fluid at the transmission case screwed in with a dipstick. Most GM vehicles equipped with automatic transmissions have such a dipstick.
  • Engine oil--Check the engine oil level.
  • Coolant--Check the radiator coolant level in the reservoir.
  • Battery-- Visually check battery cables and connections.
  • Automatic transmission--Check the fluid level.
  • Master cylinder--Check the fluid level.
  • Power Steering--Check the fluid level.
  • Windshield washer--Check the fluid level.
  • Belts & hoses--Visually check all belts and hoses for wear. NOTE: In addition to the items listed above there are cases with some manufacturer's where odd components such as manual transmission/transaxles and front differentials many be equipped with a dipstick found underhood for fluid level check. If you are unsure of a dipstick on your vehicle, check with the owners manual. 89531p07.jpg
    88231p72.jpg
    prev.gif next.gif
  • Oct 27, 2010 | 2003 Chevrolet Blazer

    1 Answer

    Where is the transmission dipstick in my manual 1.3 liter 1993 suzuki swift located and where do i fill it up?


    LEVEL CHECK With Oil Level Gauge Fig. 1: Manual transaxle oil level check - with level gauge 84241046.gif
    1. Drive the vehicle to bring the transmission up to operating temperature.
    2. With the engine stopped, remove the oil level gauge front the side case of the transaxle.
    3. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
    4. Wipe off oil level gauge with clean cloth.
    5. Fit the oil level gauge to the transaxle side case so that the threads rest on top of the case.
    6. Remove the gauge and check oil level. The level should be between FULL and LOW level line.
    7. If the level is below LOW mark, add oil until the proper level is reached.
    With Oil Level/Filler Plug
    1. Drive the vehicle to bring the transmission up to operating temperature.
    2. Raise and support the vehicle safely.
    3. Remove the transaxle oil level/filler plug.
    4. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
    5. Transaxle oil level should be even with the bottom of the plug hole. If oil level is low, adjust oil level accordingly.
    6. Install transaxle oil level/filler plug and tighten to 40 ft. lbs. (54 Nm).
    7. Lower the vehicle.

    Oct 17, 2010 | 1993 Suzuki Swift

    3 Answers

    Where is the manual transmission dipstick on 1993 mazda Mx6


    manual gear boxes do not have a dipstick , there is a bung plug on the side of the box , about 1/2 way up. to check oil level,umdo that bung plug the oil level is the bottom of that hole.when at correct level oil will just drip over the lip.

    Aug 16, 2009 | 1993 Mazda MX-6

    1 Answer

    Where can I check the transmission fluid level on my Kia Rio 2001


    On your trany u got a plug just like a transfercase on pick ups.. thats how u check the oil level..

    Mar 29, 2009 | 2001 Kia Rio

    1 Answer

    50,000 mile service


    48,000 miles or 48 months
    Maintenance Service Schedule 2007 dodge
    Change engine oil and engine oil filter
    Rotate tires
    Lubricate drivetrain / steering / suspension
    grease fittings (if equipped)-except Powerwagon
    Lubricate front drive shaft fitting
    (2500 / 3500, 4X4 & Powewagon)
    Lubricate tie rod end links - Powerwagon
    Check automatic transmission fluid level
    Check manual transmission fluid level
    Check the coolant level, hoses and clamps
    Inspect exhaust system
    Inspect brake hoses and brake linings
    Inspect the CV joints/U-joints (if equipped) and
    front suspension components
    Check spare tire for proper pressure & correct
    stowage
    Lubricate outer tie rod ends 2500/3500 4X4

    51,000 miles or 51 months
    Maintenance Service Schedule
    Change engine oil and engine oil filter
    Lubricate drivetrain / steering / suspension
    grease fittings (if equipped)-except Powerwagon
    Lubricate front drive shaft fitting
    (2500/3500, 4X4 & Powerwagon)
    Lubricate tie rod end links - Powerwagon
    Check automatic transmission fluid level
    Check manual transmission fluid level
    Check the coolant level, hoses and clamps
    Inspect exhaust system
    Inspect brake hoses
    Inspect the CV joints/U-joints (if equipped) and
    front suspension components

    Jan 04, 2009 | 2007 Dodge Ram Truck

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    112 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Fiat Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Fiat Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...