Question about 2008 BMW 1 Series

Open Question

What failure is indicated by cc id 88 in a bmw 1 series

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Clearimg brake circuit failure indication


The brake circuit failure indication on the OBC is cleared by replacing the switch located above the brake pedal.

on May 19, 2008 | 1997 BMW 3 Series

1 Answer

Hi, I have a 2006 BMW 320i E90 and yesterday the engine warning light came on, the car stalled for a few seconds and then returne to normal, but the light stayed on. the code is cc -id 29? any ideas


dude u have to have a plan first test ur battery is the number one cause of the problem u have then test ur alternator this is the number one cause of ur battery going bad witch will cause ur engine light to go on and ur car will stle

Aug 01, 2011 | 2006 BMW 3 Series

1 Answer

Will the engine from a 1988 BMW 535i fit in a 1990 BMW 535i?


Based on wikipedia...yes. From 1988-1993. I copied and pasted the information below:

M30B35
  • 3.4 liter (3430 cc) SOHC inline-6 cylinder
  • 9.0:1 compression ratio
  • 208 bhp / 211 PS @ 5700 rpm
  • 225 ft·lbf (305 N·m) torque @ 4000 rpm
  • 87 AKI / 91 RON octane fuel or better recommended
Applications:
  • 1988-1989 E24 635CSi
  • 1988-1993 E34 535i
  • 1988-1992 E32 735i
3.5 L M90 (3453 cc) Applications:
  • 1978-1983 E24 635CSi
  • 1980-1981 E12 M535i

Feb 09, 2011 | 2001 BMW 5 Series

1 Answer

Braking light failure


brake switch down by the brake pedal, replace that too.

Jun 22, 2010 | 1999 BMW 328 Series

1 Answer

What maintance should I do on 1995 bmw 525 at 180,000 mi


Hello. The BMW company has one of the most inclusive maintenance schedule of all. The BMW Maintenance System has been devised with the following objectives: maximize vehicle safety, reliability, and minimize breakdowns resulting from wear, at minimum cost. The Service Interval Light system will indicate when you are due for service based on your driving habits. In addition, there are recommendations for specific mile intervals.
The answer to your question is that is all of the recommended maintenance has been occurring all along, the 180000 mark requires the extensive INSPECTION 1. Any BMW dealership will print you off the entire checklist for the asking.

http://www.gms.cc/maintenance.htm

Nov 13, 2009 | 1995 BMW 8 Series

3 Answers

When do i need to change my brake pads on 116i bmw?


Stick to what your dealer tells you. The brake lining indicator lights when the pads are so thin the rivets will start eating into the rotors in about 1000km.

Sep 16, 2009 | 2005 BMW 1 Series

1 Answer

Dsc hydraulic unit failure


I have the same fault , that has just occured out of the blue only 38,000 on clock.
Drives perfectly and brakes fine too.
Warning light indicates Suspension Stability control
but diagnosed as yours at the same cost.
Apparently quite a common fault with series 1 , but BMW do not tell you that !!

Jun 22, 2009 | 2008 BMW 1 Series

1 Answer

Indicator flash with non stop


put your right signal on walk round your car you may find that 1 of your bulbs is out

Dec 28, 2008 | 1999 BMW 323 Series

Not finding what you are looking for?
2008 BMW 1 Series Logo

Related Topics:

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...