Question about 2003 Nissan Frontier Crew Cab

2 Answers

How to remove the frontier 2003 evaporator, I already reomve the glove box and the blower fan motor, I can see the Evap Black box, also remove 4 screw secur the box and the high and low press hose,even heater hose, the box move but some how can not come out

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

I was able to remove mine by ever so slightly bending the metal supports. It sure beat taking everything apart.

Posted on Sep 07, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,036 Answers

SORRY TO TELL YOU THE INSTRUMENT PANEL IS GOING HAVE TO BE REMOVE INSTRUMENT PANEL ASSEMBLY.

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac only blows on 5 in 03 impala


You have a bad resistor. This controls your speed of the blower motor. It is located near your blower motor on passenger side behind glove box. You might be able to access it from underneath the glove box by removing the lower panel. This is what it looks like, but you will only see the black part going into the ducts near your fan7_26_2012_4_16_09_am.jpg

Jul 26, 2012 | 2003 Chevrolet Impala

1 Answer

My 99 nissan frontier blower speeds work on 1,2,3 but, not on 4 . Any solutions?


usually its the heater fan resistor that is bad. it controls the fan speeds for blower motor. The blower motor is mounted under the glove box. It is in the corner somewhat covered by the kick panel. The card, at least on my pathfinder, is held in with 2 phillips head screws. The plug has 4 wires, one large wire and 3 smaller wires. You should see it very near to and parallel with the firewall.

The card has an on board fuse that is not replaceable. It is located on the passenger side fire wall to the left of the blower moter under the glove box. Held in with two silver phillps screws

Mar 07, 2011 | 1999 Nissan Frontier

1 Answer

How to replace main heater fan


Blower Motor REMOVAL & INSTALLATION Front Fig. 1: Front heater blower motor assembly 89696g02.gif
Remove the glove box to access the front blower motor, which is on the firewall 89696p02.jpg
The blower motor is retained by four bolts (arrows) 89696p03.jpg
The blower motor vent tube helps to cool the blower motor for efficient operation 89696p04.jpg
Push up on the clip to remove the blower motor connector 89696p05.jpg
A ratchet with extensions makes removal of the retaining screws easier 89696p06.jpg
Lift the blower motor over the control cable . . . 89696p07.jpg
. . . and remove it from the vehicle 89696p08.jpg
  1. Disconnect the negative battery cable.
  2. Open the glove box door. Gently squeeze the retainers at the rear of the box inward and allow the box to swing downward. NOTE: If additional access is required, unfasten the glove box hinge retainers and remove the assembly.
  3. Label and disconnect the electrical harness from the blower motor.
  4. Remove the blower motor housing tube and/or blower motor cover.
  5. Remove the blower motor retaining screws.
  6. Remove the blower motor from the A/C evaporator. To install:
  7. Install the blower motor in the A/C evaporator and tighten the retaining screws securely.
  8. Install the blower motor housing tube and/or blower motor cover.
  9. Connect the electrical harness to the blower motor.
  10. Reinstall the glove box and close its door.
  11. Connect the negative battery cable.
Rear Fig. 2: Service cover push pin locations 89696g03.gif
  1. Disconnect the negative battery cable.
  2. Remove both rear passenger seats.
  3. Remove the three push pin retainers from the lower edge of the auxiliary heater and air conditioning service cover.
  4. Lift the service cover outward and upward to remove.
  5. Label and disconnect the electrical harness.
  6. Remove the blower motor housing tube.
  7. Loosen the three retaining screws and remove the blower motor. To install:
  8. Install the blower motor and tighten retaining screws securely.
  9. Install the blower motor housing tube.
  10. Connect the electrical harness.
  11. Position the service cover and install the three push pin retainers from the lower edge of the cover.
  12. Install both rear passenger seats.
  13. Connect the negative battery cable.
prev.gif next.gif

Dec 19, 2010 | 1998 Ford Windstar

1 Answer

How do I change a blower motor in a chrysler Town and country


Hello, to change the blower motor resistor follow this steps:
  1. Disconnect and isolate the battery negative cable.
  2. Open the glove box.
  3. Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening, then roll the glove box downward.
  4. Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the blower motor resistor from the resistor connector receptacle.Blower motor Resistor
  5. Reach through the glove box opening to access and disconnect the blower motor pigtail wire connector from the resistor connector receptacle.
  6. Remove the two screws that secure the blower motor resistor to the evaporator housing.
  7. Remove the blower motor resistor from the evaporator housing.

Thanks

Aug 25, 2010 | 2006 Chrysler Town & Country

1 Answer

How easy or much time it take to change a front blower fan on a 2001 grand caravan and can it be done at home?


It is easy and takes about 1-hour to change out.
However, before rushing to the conclusion that the Blower Motor is bad....
1. Does the Blower work on High (or #4) only? If so then it is not the Motor it is the Resistor which is located behind the Glove box, mounted onto/into the Fire Wall. Follow step #a. below and take out the Glove Box to access. It measures approximately 3 1/2 inches wide by 1 1/2 inches high, and has 3 to 4 wires going into it.
2. Have you already checked and/or replaced the Front Blower Motor Relay located in the Fuse and Relay Center. If not you should do this first before anything. However if the Blower does only work on High then this Relay is good and you should only replace the Resistor Only.
I am very convinced that it is either the Relay the Resistor as these fail far more times than the Motor.
a. Disconnect the Negative Cable from the Battery and wait at least two (2) minutes to deactivate the Airbag Sensors.
b. Remove the Glove Box.
c. Disconnect the Electrical Connection.
d. Remove the two (2) screws holding the Air Housing to Lower Air Intake Housing.
e. Remove the two (2) screws holding the Recirculation Door Actuator.
f. Disconnect the wire harness from the clips holding them onto the Lower Intake Housing.
g. Remove the three (3) screws holding the Lower Air Intake Housing to the Lower half of the Evaporator Housing.
h. Push the rubber grommet of the blower motor wires throught the hole in the Lower Air Intake Housing.
i. Remove the Lower Air Intake Housing from the Evaporator Housing and Upper Air Intake Housing.
j. Manipulate the Recirculation Door to have access to the three (3) screws holding the Blower Motor to the Blower Housing in the bottom of the Evaporator Housing.
k. Gently bend the Recirculation Door so that you can remove the Blower Motor and Blower Wheel from the Blower Housing.
l. Remove the Blower Motor and Blower Wheel.
Some Blower Motors do not come with the Blower Wheel. Remove the retaining clip from the Shaft of the Blower Wheel and remove the Wheel off the Shaft.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 18, 2010 | 2001 Dodge Grand Caravan

1 Answer

I just got the fixit for replacing a blower motor on a 91 accord, but I can't get the fan out because the AC box is in the way. Do I have to disconnect the AC to remove the fan box?


Difficult to describe without pics, but…:
Once you’ve removed the glove box (which you’ve already done, I think)
If the vehicle is equipped with air conditioning, remove the strap bolt (between the two nuts for the evaporator on the left and the two nuts for the blower housing (the housing is probably white) on the right, just a bit lower than those) then the blower under-cover and the three blower housing retaining nuts (two nuts at the top, already mentioned, and the nut at the bottom, which is roughly between the evaporator on the left and the blower housing cover on the right).
Pull the housing out far enough to unplug the electrical connectors (at the lower right edge, right above the kick panel) and remove the blower assembly housing.
If you’re replacing the blower motor itself, or either of the blower fan wheels, separate the two halves of the hosing, remove the motor, remove the retaining clip(s) and remove the fan wheel(s).\
Installation is reverse. Then check for proper operation.
Hope you can follow this.

Dec 11, 2009 | 1992 Honda Accord

1 Answer

Cant find blower motor resostor on bmw station


you must remove glove box,remove lower cover below glove box, get under dash and use flashlight and you will see the fan resistor in the evap box, it maybe held in with a t 20 torx screw otherwise pull aside tab and pull out

Oct 16, 2009 | 2001 BMW 325

1 Answer

Ac problem


Behind the glove box in the air box right next to the evap.

Jun 17, 2009 | 2003 Nissan Frontier Crew Cab

2 Answers

Replacing Blower Motor Resistor


  1. Disconnect and isolate the battery negative cable.
  2. Open the glove box.
  3. Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening, then roll the glove box downward.
  4. Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the blower motor resistor from the resistor connector receptacle (Blower Motor Resistor).
  5. Reach through the glove box opening to access and disconnect the blower motor pigtail wire connector from the resistor connector receptacle.
  6. Remove the two screws that secure the blower motor resistor to the evaporator housing.
  7. Remove the blower motor resistor from the evaporator housing.80ac4e54.gif

Feb 04, 2009 | 2003 Chrysler Town & Country

1 Answer

Santa fe blower motor


1.disconect the neg. fron battery.
2.the blower unit is located under the dash and behind the glove box.
3.open the glove box disconnect the cord.push inwardson the sides to lower the door fully.
4.remove the dash panel to the right (has one screw)
5.remove the inner frame scrrews (four screws)
6.remove the blower/evaporator mounting bolts and remove blower motor.
7.tranfer the fan to new motor prior to installation.
8.installationis the reverse of removal.
f.y.i. use pliers to release and remove the clip holdin blower fan to th emotor

Dec 13, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2003 Nissan Frontier Crew Cab Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...