Question about 2000 Ferrari Enzo

1 Answer

My pto will not ingage

I have a 95 chevy hd-3500 454 5 speed flat bed tow truck the pto is having
problems ingaging

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

Most of the time its linkage adjustment or cable.Its been my experiance that if you let out lightly on the clutch moveing a little bit forward or reverse while ingageing the PTO that they go in smoother and completely

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Craftmen gt 5000 pto will not ingage


need to check the deck --bent or damaged--blades,mandrel,pulley,pto cable,tentioner and belt pop

May 05, 2017 | Cars & Trucks

1 Answer

Sometime when you set the speed controle in ingage and work then at other time it doent ingage at all


That is the nature of the beast ,called electronics . go see your local dealer and have them check it for you

Dec 29, 2016 | Cars & Trucks

1 Answer

Can I bypass the vacuum pump on my 1997 chevy blazer 4 wheel drive and put a cable on the other cable to ingage the front wheels


Probably not. These have two different units to lock and unlock 4wd. One locks the front diff, while the other locks the transfer case.

Sep 12, 2014 | 1997 Chevrolet Blazer

1 Answer

Why won't my 4 wheel drive ingage on my 95 Chevy k2500


Try checking the frount differential actuator. It is on the frount of the housing and has 2 wires coming out of it. screw it out of the housing and plug it in key on engine off and shift to 4x4. The rubber end will start to extend out. If it does thats not the problem. If it doesn't check for power with a test light across the terminals. If the light lights and the actuator doesn't move when pluged in replace the actuator.

Nov 05, 2013 | Cars & Trucks

1 Answer

Chevy 4x4 indicater light shows 4x4 working but only rear wheel drivv


didnt specify year or model but problem is usually the transfer case actuator sticking there are four bolts holding actuator in place remove and lube actuator usually frees it up

Dec 09, 2012 | Cars & Trucks

1 Answer

Put car in reverse after car warms and it doesnt ingage until you push on the gas. It stays in the nuetral position


hi sound like the clutch is worn and your having to use the speed of the engine to help you ingage the gear.Does the clutch slip at all when driving in a forward gear ?

Sep 02, 2010 | 1993 Saturn SC2

1 Answer

2003 chevy silverado 2500 HD when ingageing 4 wheel high on the fly it makes a load clunk and grinding noise


I had a similar problem and had to have the 4 wheel drive serviced. It need new grease. the grease i had was old and it was causing the gears not engage cleanly thus causing the grinding sound until they were realigned.

Feb 10, 2010 | 2002 Chevrolet Silverado 2500HD

1 Answer

Transmission shifts ony 123 no overdrive, it slip in overdrive


sorry to say this trans has to be removed and rebuilt seems like od clutches burnt out-do you tow heavy trailer with truck as you have to tow with od off(push button on shifter)

Oct 05, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Auto trans will not ingage


Chk tje vacuum hose on the modulator at the back of the trans. it should have vacuum. TTit has a rod that controls certain movements in the valve body. especialy downshifting. If there is no vacuum or the rod is sticking. We might have it . If there is any fluid in the mod vac hose, the modulatorhas a leaking diaphram. Good Luck,_ Ned_

Jan 03, 2009 | 2004 Chevrolet Silverado 3500

Not finding what you are looking for?
Cars & Trucks Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ferrari Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Ferrari Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...