Question about Mazda B3000

1 Answer

I cant dis-engage my cluth on my 94 mazda b3000 truck. Bled lines from reservoir but cannot get any tension on the clutch. I pumped on clutch pedel and the shift worked for about 10 min and now tension is gone and cant shift the transmission. bled air from line and still doesnt work.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Mazda Master
  • 420 Answers

Could be a throw out bearing or the shift fork is broke.

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 Mazda B3000 im replaceing the water pump but i cant get the clutch fan off how do i do this


not sure what the problem is could you be a little more clear? It it is frozen/stuck try some (lock free) wait 5 min and apply more wait 10 min and this should free up any frozen bolts. If it is a case of leverage try using a breaker bar? hope this helps

Feb 05, 2012 | Cars & Trucks

1 Answer

I need a manual on a 94 mazda b3000. on how to dissemble a fan clutch


GO BY AUTO ZONE OR ADVANCE AUTO PARTS BUY A HAYNES REPAIR MANUAL.

Jul 02, 2011 | Mazda B3000 Cars & Trucks

1 Answer

1995 mazda b3000 clutch is squeeling. no pressure on clutch pedal, doesn\t dis engage when pushed down.


might be fluid but here are some helpful websites, Good Luck Tim:

http://www.automotive-clutches.com/basic_clutch_info.html
http://www.aa1car.com/library/2003/bf50332.htm

Oct 23, 2010 | 2007 Mazda B3000

1 Answer

Clutch does not engage ----NO CLUTCH---on our 1994 B3000 Mazda Pick-up truck


Hi,it sounds like you need to have your clutch assembly replaced.If you plan on doing it yourself you can go to www.autozone.com and sign up for my zone(it's free).Thay have repair guides for most cars and trucks. hope this helps.Thank You for using fixya......iluv2fish.......Ray......

Jul 20, 2010 | 1994 Mazda 2WD B Series Pickup

1 Answer

Fuse box on 94 mazda b3000


Try testing the brake switch (it is behind the brake pedal) for 12V and continuity between wires when engaged. You can also try checking the brake light relay. It is located on the fuse block.

i hope this helps
-matthew

Oct 27, 2009 | Mazda B3000 Cars & Trucks

1 Answer

94 mazda B3000 3.0L cylinder head torque specs


Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Sep 17, 2009 | 1994 Mazda 2WD B Series Pickup

1 Answer

Clutch calibration on a manual shift 2004 Mazda3


i'm not sure what you mean, "calibrating the clutch". Is the pedal sinking to the floor or not engaging the clutch well? If it seems spongy, there may be air in the line and it will need to be bled. If it does not engage well at all, check your clutch master cylinder for proper level of fluid in the reservoir or any fluid leaking out, the hose for leaks and the slave cylinder for any leaks. If they are, then whatever part was bad will need replacement.

Hope this is a little help,
matt

Sep 17, 2009 | 2004 Mazda 3

2 Answers

Clutch goes to floor will not engage


The bleeder is located on the slave cylinder at the bell housing of the transmission. Follow the clutch pressure line down to the bell housing, and you will find the bleeder. To bleed the system properly, you will need to have someone push the clutch in, and hold it until you open the bleeder, and close it again. Repeat steps until you have a good solid clutch pedal. Make sure to not let the fluid level in the reservoir get too low as it can **** in air, and you have to start all over.

Mar 30, 2009 | 1994 Dodge Stealth

1 Answer

'03 Wrangler, Clutch Problems


HI, you can start with the basics ,check fluid at the clutch slave reservoir ,if it need fluid ,add to the max and pump the clutch pedal to see if it engage,if not,you must have to bleed it ,it should be a bleeding valve at the slave cilinder,you will need assistance to do this ,to pump the cluth pedal several times and hold it down while you open and let the air out .if this dont help,it may be a bad cluth assembly,it is not to hard to replace it and you dont need any special tools,just basic tools and if you cant get a tranny jack you can use a floor jack, this are the basic steps disconect your positive battery cable remove the shifter,lift and secure the jeep in jack stands,disconect the drive shaft at the u joints , remove all the bolts that holds the tranny to the motor,you my have to remove the starter,position the jack under the tranny ,remove the cross member,remove all cables and every thing around tranny carefully pull the tranny to the back,replace the cluth good luck.................

Nov 11, 2008 | 2003 Jeep Wrangler

2 Answers

I can not pot my ford focus in gear i dont now what is is as cant finf cluth cable and the cluth peddel got no preass be hind it and my car is 2001 and do u now where the cluth is in the engean


yes the clutch is
well u have to take the gear box out
and the clutch is on the back of the engine


now the cable runs from the pedel to the gear box
if u look u will see a blck cable and you can adjust it
it might need adjusting

Aug 02, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...