- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no easy fix
replace the ac compressor or have an a c shop replace the ac shaft seal
both are not diy domain as it requires an accredited ac professional to do the job to get the ac working properly again
ac compressors are protected by high pressure and low pressure switches in the system. If the ac compressor will not engage it may be --no gas--too much gas ---blockage in the system--- no cooling fan for the condensor-- burnt out clutch behind the pulley
have an accredited ac specialist check it out.
Looks like the low pressure switch gets power from a 10amp ac fuse. Power then goes to the ac relay which is powered on by the ac heat controller on the dash. Power then goes thru the high pressure switch to the compressor. The ac relay is grounded to the body. Do you have power on the lite and dark green wires going into the relay and is it grounded ?