Question about 2001 Suzuki Grand Vitara

2 Answers

What is the function of the switch P/N by the transmission stick

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

Power and normal. Switch to power when towing. The gears change at higher r.p.m. for more power when towing. Be sure to put it back to normal when not towing bad m.p.g. in power.

Posted on Sep 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,049 Answers

It is the Power -vs- Normal switch. In Power (P) mode, the shift points on your transmission are extended so you can accelerate quicker. The Normal (N) mode is for typical driving and will increase your gas mileage.

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What happens if brake pedal switch sticks ?


It may not let transmission go into lockup when in high gear.

Apr 13, 2017 | Oldsmobile Cars & Trucks

1 Answer

Where is the neutral switch located on a 1994 suzuki swift manual transmission auto


like most m/t ,its on top of the transmission.
that is because it needs to sense the SHIFT rails there.
and takes flash light to see under car.
but usually there is no neutral switch,
only reverse. for backup lamps
why not post what dont work right first?

automatics have PRNDL, and many switches for many reasons

the stick shift has clutch switch, this is the functional , same part
so car cant move in gear cranking....

Jan 08, 2016 | Suzuki Cars & Trucks

1 Answer

Toyota yaris in limp mode with p0705/stability control light illuminated


EOBD II Error Code: P0705
Fault Location:
Multi-Function Transmission Range Switch - Malfunction (PRNDL Input) - Implausible Signal
Possible Cause:
Wiring/Connectors from/to Multi-Function Switch faulty.
Multi-Function Switch faulty.
Engine control module (ECM)/Powertrain control module (PCM)/Transmission control module.

Possible Solutions:
Check Wiring/Connectors from/to Multi-Function Switch.
Check Multi-Function Switch.
Check Measuring Value Blocks.

Apr 04, 2014 | Toyota Yaris Cars & Trucks

1 Answer

Netural safety switch


Daewoo cars have track record for dependability in addition to solid construction. The most important part of a car's design is the safety features. Circumvent excessive risk while motoring by insuring that your car has the safety gear that you want. A vehicle's Neutral Safety Switch is located on your clutch in the case that it's a manual transmission, and on the shifter in an automatic. A broken Neutral Safety Switch can cause your vehicle to suddenly start in gear, causing vehicle damage or personal injury.

If you don't have the Neutral Safety Switch, your vehicle will fail to work. The Neutral Safety Switch is typically situated below the clutch of trucks which have a stick-shift transmission. The primary function of a Neutral Safety Switch is to stop your truck from starting when in gear. The car's Neutral Safety Switch acts as a safety feature, keeping you from starting the engine if the car is in gear. The Neutral Safety Switch is an electronic part which is essential while starting your car.Here's a link to what it look's like.

Mar 22, 2013 | 2000 Daewoo Lanos

1 Answer

Fault p1754 limp mode


This DTC is for an input clutch solenoid vavle function issue. This could be caused by a faulty Transmission Control Module (TCM), A bad terminal pin connection at the transmission harness connector, or a faulty or sticking control valve. My best solution i can provide to you is to take it either to the dealer where they can use the Consult II scan tool to monitor the transmission control functions, or somewhere that has an equivalent scanner to monitor these items. Hope this helps

Sep 08, 2012 | 2005 Nissan Pathfinder SE

1 Answer

On a 2002 cavalier the transmission has no dip stick and it is slipping


Replace the dipstick for your transmission. Top it off with fluid, and re assess the performance of your transmission.

Your transmission will not function properly without a certain build up of pressure. Not having the dipstick in the check line will not allow this pressure to build.

Jan 06, 2011 | 2002 Chevrolet Cavalier Coupe

1 Answer

Where is the automatic transmission dipstick located on a 89 ford escort and why does the gear shift act in its starting, whether or not? ( moving it)


Dip stick comes out of dip stick tube coming from transmission (side of trans) Look real hard on the side of the transmission behind the engine you will see it.

The second issue sounds like a neutral safety switch.

Oct 05, 2010 | 1989 Ford Escort

1 Answer

Reverse light dont work lights are good


The switch detecting the reverse position of the gear stick may be faulty. If you have automatic transmission the switch is under the transmission lever console as part of the neutral safety switch assembly.

Sep 06, 2010 | 1989 Toyota Camry

3 Answers

Car wont go in gear


you have a problem with posibly witht he adjustment on you neutral switch. the transmission has this to prevent starting in gear. it obviosly works fine in newtral so it needs to be adjusted or the lever on your transmission needs adjust ment to allow this sensor to do its job
i hope this helps

May 06, 2009 | 1994 Lincoln Town Car

Not finding what you are looking for?
2001 Suzuki Grand Vitara Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...