Question about 1995 Nissan Pickup

Open Question

Remove front of speedodometer panel - 1995 Nissan Pickup

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The speedometer is not working the chesenck light is on we replaed the speedometer sensor


Could be speedodometer cable broke inside cable housing or speedodometer cluster could be bad.

Sep 07, 2013 | 1999 Jeep Wrangler

1 Answer

Speedodometer 1992 toyota not working


The sensor is usually located at the passenger side axel near the wheel drum. It works by sending a signal to the PCM at the exact velocity. I think it is the sensor.

Nov 12, 2011 | 1992 Toyota Pickup

1 Answer

Antilock braking comes on just before stopping


check wheel speed senosrs there onfront wheels you need to remove tires or check vehicle speed sensor after speedodometer cable gose in to it on transmission but it could be the anti lock system it self bpmv brake pressure modulator valve but its more then likely the wheel sensor or speed o sensor

Oct 21, 2010 | GMC Envoy Cars & Trucks

1 Answer

The speedodometer does not work. I'm having


Before you remove the dash.Try and eliminate if its a fuse.
Fuses are either inside the car hidden in the dash ,and in the main engine compartment.

Track your fuses with your manual ,if blown there should be spares in the fuse box itself.

Nov 15, 2009 | 1995 Honda Accord

2 Answers

When driving, Speedodometer drops to zero.


I thought this year of Santa Fe had a 100k Warranty? If so, take it to the dealer and get it fixed. Even if it's not under warranty, take it and get it fixed! This is dangerous to use with the cruise control!! Do not use the Cruise Control until you get this fixed. It sounds like a bad speedomoter sensor, and that is confusing the Cruise Control. Either your speedometer is going to stop working altogether, or your going to RAM someone from behind going at a DANGEROUS rate of speed. Take it and get it fixed, and do not use the Cruise Control until it is fixed.

Jul 19, 2009 | 2003 Hyundai Santa Fe

2 Answers

Odometer quit working but speedodometer works all gagues work need to know what to check


The odometer is driven by a small electic motor. It receives the same signal the speedometer receives. If the odometer motor is no longer functioning, I'm affraid the entire instrument panel cluster will have to be replaced.
Any other questions, let me know.
Regards,

May 07, 2009 | 1993 Saturn SL

2 Answers

1995 Cougar Odometer/trip-meter inop


Section 13-01: Instrument Cluster—Conventional 1995 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION Instrument Cluster Removal and Installation
  1. Disconnect battery ground cable (14301) .
  1. Remove screws holding instrument panel reinforcement (017A28) .
  1. Remove screws holding instrument panel lower shield (045G02) .
  1. Remove fasteners holding steering wheel column as outlined in Section 11-04 . Gently lower steering column.
  1. Remove fasteners holding the instrument panel finish panel (044D70) and gently pry off.



  1. Remove four instrument cluster retaining screws. (Do not remove screws from the instrument cluster main lens (10887) and instrument cluster mask (10890) ).
  1. Slide the instrument cluster (10849) to the right of the instrument panel opening and unhook the instrument panel harness from the back of the instrument cluster .
  1. Remove the instrument cluster from the instrument panel (04320) .
-----------------------
Speedometer/Odometer Federal law requires that the odometer in any replacement speedometer (17255) must register the same mileage as that registered in the removed speedometer . Since the speedometer mileage cannot be reset on this unit, affix odometer sticker to driver's door pillar and record original vehicle mileage. Removal
  1. Disconnect battery ground cable (14301) .
  1. Remove the instrument cluster (10849) as outlined.
  1. Remove seven screws retaining the instrument cluster mask (10890) and instrument cluster main lens (10887) .
  1. Remove speedometer assembly.
Installation
  1. Position the speedometer assembly to the instrument cluster back plate (10848) and install.
  1. Position the instrument cluster mask and instrument cluster main lens to the instrument cluster back plate and install the seven retaining screws.
  1. Install the instrument cluster as outlined.
  1. Connect battery ground cable and check the operation of the speedometer .
please rate if this helps

Mar 24, 2009 | 1994 Mercury Cougar

1 Answer

Speedodometer don't work


check the output speed sensor on the tranny

Mar 01, 2009 | 2002 Mitsubishi Galant

1 Answer

Instrument panel


If you take off the cover around the steering colum there should be a wire connected above your blinker switch if its not all the way pushed in tac ,speed and other lights will not work.

Nov 03, 2008 | 1992 Honda Civic

1 Answer

Speedodometer


The speedo is electronic, only 2 things will cause this, the vehicle speed sensor, the other is the speedo head itself, this assumes you have checked the fuses, the most likely problem is the speedo itself.

Sep 02, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...