Question about 1996 Mercedes-Benz C-Class

Open Question

I need to get my mercedes 230K differential rebuilt

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I rebuilt the differential

No,,, only when replacing the pinion bearings do you need a new crush sleeve,,if you need bearings rlaced, i suggest taking it to a shop to have this done because replacing the bearings is pecision work,, if it is not right,, it will roar loud ,, or worse ruin the rearend,,

Sep 14, 2014 | Cars & Trucks

1 Answer

Refill differential oil on Mercedes Benz A160

undo fill plug with a 3/8 rachet, fill until fluid comes out of fill plug hole

Mar 24, 2013 | Cars & Trucks

1 Answer

How much will it cost to replace the rear differential on my 2002 Chevy Blazer (two-wheel drive)? should i replace with new or rebuilt?

In my area it can be done for about 800.00 plus the cost of the rear.And in my opinion if the rear is rebuilt with a new ring and pinion gear that's the biggest part of the rear then I consider that along with new axle seals and differential gasket it would be almost new.This would save a large sum of money for one that's rebuilt.

Mar 04, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

1992 mercedes 190e won't shift into reverse . where is the electric solenoid located in trans.

this is not an electric issue. at this point, the transmission will need to be rebuilt. try to locate a trusted rebuilder who is familiar with mercedes. others have tendency to screw these up. cheers

Dec 21, 2009 | 1992 Mercedes-Benz E-Class

1 Answer

Have noise in rear when vehicle is underload. it

The mechanic speaks the truth.The diffs in these did have problems.Its a common occurence.Hope this helps

Jul 29, 2009 | 1995 Jeep Cherokee

1 Answer

1985 M Benz Sd differential s half shafts

first remove the differential half shafts and drive shaft, remove rear cap, loose the bolts on each end bearing,remove the differential assy. then replace bearings

Apr 12, 2009 | 1985 Mercedes-Benz 300

1 Answer


The shift cover can only be replaced, or you can try a little well placed tape on the broken clip to help hold it in. Common problem. But you will need that cover loose anyway to remove the ashtray. Pull the shift cover up around the shifter, taking care to take the connectors loose. Now use your fingers to reach under the front edge of the wood trim/or metal trim depending on package and pull up to take out from around shifter. Also, go ahead and pop the cupholder up. In the bottom of the compartment is a rubber cushion. You need a long hook or long pliers to grab that rubber and pull it up out ot the compartment. With that removed, grab the cupholder and pull up slightly until you feel it release. Then twist the whole assembly clockwise to remove. This will give you all the access you need to the ashtray compartment.

Oct 27, 2008 | 2002 Mercedes-Benz C-Class

Not finding what you are looking for?
1996 Mercedes-Benz C-Class Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides