Question about 2002 Mitsubishi Diamante
The garage door is coded with tiny switches to code with the remote if you lost the code make sure the codes in the remote is in sequence to the garage door remove the cover and look at the code and as well on the garage door motor area is a box cover remove this and ensure they match correctly
Posted on Sep 06, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
So, you get out your remote control to your garage door opener and, then get your owners manual to your new car. You need to follow the instructions from the manufacturer to be able to program the remote control to the car.
Ok, you have followed the instructions from the car manufacturer and you press the button for the garage door to go up.......and nothing happens. So, then you think you have missed a step on the programing. Well, what most instruction manuals leave out is the step from programing the car/truck/van to the garage door machine itself. On the back side of your garage door opener is a panel called the logic board. The logic board is the computer or brain of the machine. Most new garage door openers now are a mulit-code machine. By that, i mean it uses several signals each time you press the button on your remote control. This is for security, so your code can't be stolen by a code-grabber.
Now, comes the step of programing the vehicle to your garage door opener. Once you have followed the instructions of programing your vehicle, you now have to "teach" the car to the garage door opener. You will need some help doing this. You will have to get someone to press the button in your vehicle and hold it down, while someone else has to press the learn button on the back your your garage door opener mounted on the ceiling. The learn button on the back of your machine will be square if using a liftmaster machine. Craftsman, Liftmaster, Chamberlain are all the same. Their learn buttons are square, and usually are yellow, red/orange, or purple. If using a Genie, it has a button that says "learn button".
The person pushing the button on the machine will only have to push and release the learn button. DO NOT hold this button down. If you do, it erases all of the programing in the machine, and you have to re-program all the remote controls that you have. You will have to read my other hub to find out how to do that. You will probably say a few words you shouldn't either. :-) Programing the vehicle to the machine only takes a second, and when the machine accepts the code, the light bulb on the machine should flash for a brief moment, and you should hear audible click. Yep, it's that easy! I dont know why the auto makers leave that step out. Anyway, i hope this helps, and if you have any questions.. leave them in my comments and i will try to walk you through it. See the photo above and you will see the typical logic board...the square red/orange learn button is easy to see. Just remember to press and release
May 08, 2012 | 1995 Lincoln Town Car
Dec 19, 2010 | GMC Yukon XL Cars & Trucks
Jun 11, 2009 | 2005 Nissan Murano
May 29, 2009 | 2006 Audi A4
Apr 24, 2009 | 2005 Chrysler Pacifica
Apr 07, 2009 | 2000 Lincoln Navigator
Mar 27, 2009 | 2005 Chevrolet TrailBlazer
Mar 22, 2009 | 2004 Lexus RX 330
Mar 08, 2009 | 2005 Chrysler Pacifica
Sep 09, 2008 | 2002 Honda Civic
202 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: