Question about 1994 Oldsmobile Cutlass Supreme

Open Question

Head lights and turn signal don't work.

I have a new battery and still the head lights and turn signals don't work. I check bulbs and fuses and still nothing. could you tell me if it might be ssomething electrical or something I might be able to fix myself.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 k1500 brake lights and turn signals don't


Do you have power going into the turn signal switch from the brake switch, and then coming out to go to the lights ?

Jun 23, 2013 | Cars & Trucks

1 Answer

1995 GMC Suburban XLT 4x4 SLT. the top break light works but not the sides. Also the turn signals are not working. Have checked fuses and changes bulbs..What can this be


Turn signals are one of the easiest systems in your car to troubleshoot. Your signal flashers either work or they don't. If they don't, either you need to change the bulbs or you need to replace your turn signal relay. Know more about car diagnostic tools for automobile.

Oct 29, 2012 | Cars & Trucks

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

Right back turn signal fuse for ford ranger 2005 where is it what number is it and what voltage is it


I don't think that there is a fuse for one turn signal light, if the fuse for the turn signal lights was blown no turn signal lights would work, your problem is most likely a blown bulb or a loose wire, check the wiring & the bulb......hope this helps......cheers.

Sep 16, 2011 | Ford Ranger Cars & Trucks

2 Answers

The turn singnals don't flash on my 2004 chevy impala


It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged.
Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057
Hope this helps.Your valuable feedback would be appreciated.Thanks

Jun 11, 2011 | 2004 Chevrolet Impala

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

2 Answers

2000 Pontiac Grand Am headlight not working but the turn signal is. I changed the bulb but still nothing, how do I fix this?


You either have an elecrical problem or your you might have a fuse blown beacuse the signal and the head light it self work off of two seperate fuses witch means if the head light fuse is blown them the signal will still work. So what I would do first is I would check the fuses and the best way to check the fuses is to have a check light.

Jan 10, 2010 | Pontiac Grand Am Cars & Trucks

1 Answer

Checked all fuses-good, swapped bulbs-good, hazard lights-good, head lights good, turn signals-good but no brake lights. 1995 chevy silverado


Does the turn signals or hazards work in the rear?? Yes... it may be the brake switch or the turn signal switch (power goes from battery, to the brake switch then to the turn signal switch, then to the lights. No? .. again.. possibly turn signal switch or the wiring between cab and bed.

Jun 04, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...